Description
BUY N80C286-16 https://www.utsource.net/itm/p/12611839.html
| Parameter |
Description |
Value |
Unit |
| Operating Voltage |
Range of supply voltage |
4.75 to 5.25 |
V |
| Operating Temperature |
Temperature range for operation |
0 to 70 |
°C |
| Maximum Power |
Maximum power consumption |
1.3 |
W |
| Clock Frequency |
Supported clock frequency |
8, 10, 12.5 MHz |
MHz |
| Data Bus Width |
Width of the data bus |
16-bit |
bits |
| Address Bus Width |
Width of the address bus |
24-bit |
bits |
| Instruction Set |
Type of instruction set architecture |
x86 |
- |
| Package Type |
Type of packaging |
PGA |
- |
| Pin Count |
Number of pins |
68 |
- |
Instructions:
- Power Supply Setup: Ensure that the supply voltage is within the specified operating voltage range (4.75V to 5.25V) to avoid damage to the chip.
- Clock Configuration: Configure the clock frequency according to the system requirements. The N80C286-16 supports frequencies of 8 MHz, 10 MHz, and 12.5 MHz.
- Temperature Management: Operate the device within the specified temperature range (0°C to 70°C). For extended temperature ranges, consult additional datasheets or manufacturer specifications.
- Bus Connections: Connect the data and address buses correctly. The data bus width is 16 bits, and the address bus width is 24 bits.
- Programming: Use the x86 instruction set for programming. Refer to the x86 architecture manuals for detailed instructions on assembly language programming.
- Installation: Install the chip in a PGA (Pin Grid Array) socket suitable for 68-pin configurations. Ensure all connections are secure and correct to prevent operational issues.
- Testing: After installation, test the chip thoroughly under different conditions to ensure it operates as expected within its parameters.
(For reference only)
More detail about Utsource Holding Company Limited
