Description
BUY CM6805AG https://www.utsource.net/itm/p/12611902.html
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Description |
| Input Voltage |
V_IN |
2.7 |
- |
5.5 |
V |
Operating input voltage range |
| Output Voltage |
V_OUT |
- |
3.3 |
- |
V |
Fixed output voltage |
| Output Current |
I_OUT |
- |
600 |
- |
mA |
Maximum continuous output current |
| Quiescent Current |
I_Q |
- |
60 |
- |
μA |
Supply current at no load |
| Dropout Voltage |
V_DROPOUT |
- |
200 |
- |
mV |
Typical dropout voltage |
| Power Dissipation |
P_DISS |
- |
625 |
- |
mW |
Maximum power dissipation |
| Operating Temp |
T_OP |
-40 |
- |
85 |
°C |
Operating temperature range |
| Storage Temp |
T_STG |
-55 |
- |
150 |
°C |
Storage temperature range |
Instructions:
- Power Supply Connection: Connect the input voltage within the specified range (2.7V to 5.5V) to the Vin pin and ground to the GND pin.
- Output Configuration: The CM6805AG provides a fixed output voltage of 3.3V. Ensure that the load connected to the Vout pin does not exceed the maximum output current of 600mA.
- Capacitor Requirements: Use a minimum of a 1μF ceramic capacitor on the input side and a 1μF ceramic capacitor on the output side for stability.
- Thermal Considerations: Ensure adequate heat sinking if operating near the maximum power dissipation limit.
- Operating Temperature: The device is designed to operate between -40°C and +85°C. For storage, keep the device between -55°C and +150°C.
- Handling Precautions: Handle with care to avoid damage from electrostatic discharge (ESD).
(For reference only)
More detail about Utsource Holding Company Limited
