Description
BUY N83C196KB12 https://www.utsource.net/itm/p/12611905.html
| Parameter |
Description |
Value |
Unit |
| Device Type |
8-bit Microcontroller |
|
|
| Package |
QFP (Quad Flat Package) |
40 pins |
|
| Operating Voltage |
Supply Voltage Range |
2.7 to 5.5 |
V |
| Operating Frequency |
Maximum Clock Frequency |
12 |
MHz |
| Flash Memory |
Program Memory Size |
16 |
KB |
| RAM |
Data Memory Size |
512 |
B |
| EEPROM |
Electrically Erasable Programmable ROM Size |
256 |
B |
| I/O Pins |
Number of Input/Output Pins |
32 |
|
| Timer/Counters |
Number of Timers |
3 |
|
| Communication Interfaces |
Available Interfaces |
UART, SPI, I2C |
|
| ADC Channels |
Analog-to-Digital Converter Channels |
8 |
|
| ADC Resolution |
Resolution of ADC |
10 |
bits |
| Working Temperature |
Operating Temperature Range |
-40 to +85 |
°C |
| Packaging |
Package Type |
Tube |
|
Instructions for Use:
Power Supply Requirements:
- Ensure the supply voltage is within the range of 2.7V to 5.5V.
- Connect appropriate decoupling capacitors near the power supply pins to ensure stable operation.
Clock Configuration:
- The device supports up to a 12MHz external clock. Configure the oscillator settings as per your application requirements.
Memory Management:
- Utilize the 16KB flash memory for storing program code and the 512B RAM for data storage during runtime.
- The 256B EEPROM can be used for non-volatile data storage.
I/O Pin Configuration:
- Configure the 32 I/O pins based on your application needs using the internal pull-up resistors or setting them as inputs/outputs.
Peripheral Setup:
- Initialize timers, ADC, and communication interfaces (UART, SPI, I2C) according to the specific protocol requirements and timing constraints.
Programming:
- Use an in-circuit programmer compatible with the N83C196KB12 to upload code to the microcontroller.
Environmental Conditions:
- Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
Handling Precautions:
- Handle the device with care to avoid damage from electrostatic discharge (ESD). Use proper anti-static precautions when handling and soldering.
Note: Always refer to the official datasheet and application notes for detailed information and specific guidelines.
(For reference only)
More detail about Utsource Holding Company Limited
