RTD2120L

RTD2120L

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY RTD2120L https://www.utsource.net/itm/p/12611963.html

Parameter Symbol Conditions Min Typ Max Unit
Supply Voltage VDD - 2.7 - 5.5 V
Operating Temperature - -40 - 85 °C
Input Voltage Range VIN - 0 - VDD V
Output Current (Source) IOUT - - 10 20 mA
Quiescent Current IQ - - 3 5 μA
Response Time τ Rising/Falling Edge - 10 - μs
Signal-to-Noise Ratio SNR - - 60 - dB

Instructions for RTD2120L

  1. Power Supply Connection:

    • Connect the supply voltage (VDD) between 2.7V and 5.5V to the VDD pin.
    • Ensure a stable power supply to avoid fluctuations affecting performance.
  2. Input Signal:

    • Apply the input signal within the range of 0V to VDD.
    • Ensure that the input signal does not exceed the supply voltage to prevent damage.
  3. Output Configuration:

    • The output can source up to 20mA, but it is recommended to operate at or below 10mA for optimal performance.
    • Use appropriate load resistance to match the current requirements.
  4. Operating Environment:

    • Operate the device within the temperature range of -40°C to 85°C.
    • Avoid exposing the device to environments with excessive humidity or corrosive gases.
  5. Signal Handling:

    • For best performance, ensure the response time matches system requirements.
    • Maintain a high signal-to-noise ratio by minimizing noise sources in the vicinity of the device.
  6. Quiescent Current:

    • Monitor the quiescent current, which should typically be around 3μA, to ensure efficient power usage.

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited