BTS5014SDAAUMA1: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Continuous Drain Current	ID	Tch = 25°C	-	40	-	A
		Tch = 100°C	-	28	-	A
Peak Pulse Drain Current	IPP	Tch = 25°C, t=10ms	-	60	-	A
		Tch = 100°C, t=10ms	-	37	-	A
Gate Source Voltage	VGS(th)	IGSS = ±250μA	1.1	1.8	2.5	V
On-State Resistance	RDS(on)	VGS = 10V, ID = 40A	-	4.4	-	mΩ
		VGS = 4.5V, ID = 28A	-	5.5	-	mΩ
Input Capacitance	Ciss	VDS = 12V, f = 1MHz	-	2200	-	pF
Output Capacitance	Coss	VDS = 12V, f = 1MHz	-	95	-	pF
Reverse Transfer Capacitance	Crss	VDS = 12V, f = 1MHz	-	2100	-	pF
Total Power Dissipation	PTOT	Ta = 25°C	-	-	200	W

Installation and Handling:
- Handle the device with care to avoid damage to the pins.
- Ensure that the device is mounted on a suitable heatsink if operating at high current or power levels.
Electrical Connections:
- Connect the drain (D) terminal to the load or high side of the circuit.
- Connect the source (S) terminal to the ground or low side of the circuit.
- Apply the gate (G) voltage relative to the source to control the switching action.
Operating Conditions:
- Do not exceed the maximum ratings provided in the parameter table.
- Ensure that the junction temperature does not exceed the maximum allowable limit.
- For reliable operation, keep the gate-source voltage within the specified limits.
Thermal Considerations:
- Monitor the thermal resistance and ensure adequate cooling if necessary.
- Use thermal management techniques such as heatsinks or forced air cooling for high-power applications.
Testing and Troubleshooting:
- Verify the correct installation and connections before applying power.
- Test the device under controlled conditions initially to confirm proper operation.
- If issues arise, check for shorts or open circuits, and verify all connections and power supplies.

(For reference only)