FDMS86300: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source On-State Resistance	RDS(on)	VGS = 10V, ID = 30A	-	2.5	-	mΩ
Continuous Drain Current	ID	TC = 25°C	-	60	-	A
Pulse Drain Current	IGM	TP = 10μs, Rep Rate = 10%	-	180	-	A
Gate Threshold Voltage	VGS(th)	ID = 250μA	1.0	1.7	2.4	V
Input Capacitance	Ciss	VDS = 10V, f = 1MHz	-	2400	-	pF
Total Gate Charge	Qg	VGS = 10V, IDS = 30A	-	95	-	nC
Zero Gate Voltage Drain Current	IDSS	VDS = 10V	-	1	-	μA
Maximum Junction Temperature	TJ(max)	-	-	-	175	°C

Handling Precautions:
- Handle the FDMS86300 with care to avoid damage to the device.
- Use appropriate ESD protection measures when handling.
Mounting and Assembly:
- Ensure proper alignment of the component during mounting to avoid misalignment issues.
- Follow recommended soldering profiles to prevent thermal damage.
Electrical Connections:
- Verify all electrical connections are correct before applying power.
- Ensure that the gate voltage (VGS) does not exceed the maximum rated value.
Thermal Management:
- Provide adequate heat sinking or cooling solutions if operating near maximum current ratings.
- Monitor the junction temperature to ensure it remains within safe operating limits.
Operating Environment:
- Operate the device within specified environmental conditions to ensure reliable performance.
- Protect against moisture and corrosive environments as necessary.
Testing:
- Perform initial testing at lower power levels to verify operation.
- Use test conditions similar to those listed in the parameter table for accurate measurements.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Keep components in original packaging until ready for use to protect against static damage.

(For reference only)