Description
BUY G3MB-202P-24VDC https://www.utsource.net/itm/p/12612227.html
| Parameter |
Description |
| Model Number |
G3MB-202P-24VDC |
| Type |
Solid State Relay (SSR) |
| Input Voltage |
3 to 32 VDC |
| Control Voltage |
24 VDC |
| Load Voltage |
AC: 120/230 V, DC: 24 to 280 V |
| Continuous Current |
2 A (resistive load) |
| Peak Current |
6 A (for 1 second) |
| Switching Method |
Zero-crossing switching (AC), random turn-on (DC) |
| Isolation Voltage |
5000 Vrms for 1 minute |
| Leakage Current |
Max. 10 渭A |
| Operating Temp. |
-40 to +85 掳C |
| Storage Temp. |
-40 to +85 掳C |
| Dimensions |
22.4 x 13.8 x 12.7 mm |
| Weight |
Approx. 4 g |
Instructions:
Installation:
- Ensure the relay is mounted on a heatsink if continuous operation at high current or in high ambient temperatures is expected.
- Use appropriate wiring and connectors that can handle the rated current and voltage.
Connection:
- Connect the control circuit to the input terminals of the relay.
- Connect the load circuit to the output terminals ensuring correct polarity for DC loads.
Operation:
- Apply the control voltage to switch the relay ON/OFF.
- For AC loads, the relay will switch at zero-crossing points to minimize electromagnetic interference.
- For DC loads, the relay can switch at any point during the cycle.
Maintenance:
- Regularly inspect connections for corrosion or looseness.
- Ensure ventilation around the relay is adequate to prevent overheating.
Safety Precautions:
- Do not exceed the maximum ratings as specified in the parameter table.
- Handle with care to avoid damage from electrostatic discharge (ESD).
- Disconnect power before performing any maintenance or installation.
(For reference only)
More detail about Utsource Holding Company Limited
