Description
BUY JQX-15F-012-1H6 https://www.utsource.net/itm/p/12612349.html
| Parameter |
Value |
| Part Number |
JQX-15F-012-1H6 |
| Type |
Relay |
| Coil Voltage |
12V DC |
| Coil Resistance |
750Ω ± 10% |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Contact Rating |
10A, 250V AC / 30A, 30V DC |
| Insulation Resistance |
>100MΩ at 500V DC |
| Dielectric Strength |
1500V AC for 1 minute |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Operating Humidity |
95% RH at +40°C |
| Contact Material |
Silver Alloy |
| Terminal Connection |
Solder Lug |
| Dimensions |
17.5mm x 12.5mm x 26.5mm |
| Weight |
12g |
Instructions:
- Installation: Ensure the relay is mounted on a flat surface with adequate ventilation to dissipate heat.
- Coil Connection: Connect the coil terminals to the appropriate power supply matching the rated coil voltage.
- Contact Wiring: Wire the load and control circuits to the common (COM), normally open (NO), and normally closed (NC) terminals as required by your application.
- Handling Precautions: Avoid exposing the relay to environments exceeding the specified operating and storage temperatures and humidity levels.
- Inspection: Regularly inspect the relay for signs of wear or damage, especially the contacts and insulation.
- Maintenance: Keep the relay clean and free from dust and contaminants that could affect performance.
- Disposal: Dispose of the relay according to local regulations concerning electronic waste.
(For reference only)
More detail about Utsource Holding Company Limited
