MAX2406EEP: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage	Operating supply voltage range	Vcc	2.7	-	5.5	V
Output Current	Maximum output current	Io	-	100	150	mA
Quiescent Current	Supply current with no load	Iq	-	4	6	渭A
Shutdown Current	Supply current in shutdown mode	Ishutdown	-	0.1	0.5	渭A
Load Regulation	Change in output voltage due to load change	Io = 0mA to Io	-	2	5	mV
Line Regulation	Change in output voltage due to input voltage change	Vin = 3V to 5.5V	-	2	5	mV
Dropout Voltage	Input-to-output voltage difference at which regulation is lost	Io = 100mA	-	250	450	mV
Output Voltage Range	Adjustable output voltage range	Vout	1.2	-	5.0	V
Operating Temperature	Ambient temperature range for operation	Ta	-40	-	85	掳C

Power Supply Connection:
- Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.
Output Configuration:
- For adjustable output voltage, connect an external resistor network between the ADJ pin, Vout pin, and GND pin as specified in the datasheet.
- For fixed output voltage models, no external resistors are required.
Shutdown Mode:
- To enter shutdown mode, apply a low signal to the SHDN pin. This reduces the quiescent current significantly.
Capacitor Selection:
- Choose input and output capacitors based on the application requirements. Typical values are provided in the datasheet for stability and transient response.
Thermal Considerations:
- Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
PCB Layout:
- Follow recommended PCB layout guidelines for optimal performance, especially regarding the placement of bypass capacitors and thermal vias.
Handling Precautions:
- The MAX2406EEP is sensitive to electrostatic discharge (ESD). Handle with appropriate ESD precautions.

For detailed specifications and advanced configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)