Description
BUY SKM400GB12V https://www.utsource.net/itm/p/12613854.html
| Parameter |
Value |
Unit |
| Type |
IGBT Module |
- |
| Part Number |
SKM400GB12V |
- |
| Collector-Emitter Voltage (Vce) |
1200 |
V |
| Collector Current (Ic) |
400 |
A |
| Turn-off Time (t(off)) |
0.5 |
渭s |
| Turn-on Time (t(on)) |
0.7 |
渭s |
| Gate-Emitter Voltage (Vge) |
卤20 |
V |
| Operating Temperature |
-40 to +150 |
掳C |
| Case Type |
Pressfit |
- |
Instructions for Use:
- Installation: Ensure the mounting surface is clean and flat before installing the SKM400GB12V. Apply thermal paste evenly on the heat sink where the module will be mounted.
- Electrical Connections: Verify all electrical connections are correct and secure. The module should be connected according to the circuit diagram provided in your design specifications.
- Heat Management: Adequate heat dissipation is critical. Ensure the heat sink is properly attached and that there is sufficient airflow around the module.
- Operating Conditions: Do not exceed the maximum ratings listed in the parameter table. Pay special attention to the operating temperature range and current limits.
- Gate Drive Requirements: Ensure the gate drive voltage remains within the specified limits of 卤20V. Incorrect gate drive can lead to improper switching or damage to the module.
- Storage: Store in a dry, cool place away from direct sunlight and sources of heat when not in use.
(For reference only)
More detail about Utsource Holding Company Limited
