LTZ1000ACH
LTZ1000ACH

 

LTZ1000ACH

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY LTZ1000ACH https://www.utsource.net/itm/p/12623925.html

Parameter Symbol Min Typ Max Unit Description
Output Voltage VOUT 6.99 7.00 7.01 V Voltage output stability
Initial Accuracy -2 +2 mV Maximum deviation from nominal value at 25°C
Temperature Coefficient TCVOS -0.3 +0.3 ppm/°C Change in output voltage per degree Celsius
Long Term Stability LTS 2 μV/√kHr Voltage drift over time
Line Regulation LREG 0.2 μV/V Change in output voltage due to input voltage change
Load Regulation LDREG 0.8 μV/mA Change in output voltage due to load current change
Dropout Voltage VDROPOUT 1.5 V Minimum difference between input and output voltage for regulation
Supply Current ISUPPLY 9 mA Current consumed by the device
Operating Temperature TOPR -40 +85 °C Temperature range for operation
Storage Temperature TSTG -65 +150 °C Temperature range for storage

Instructions for Use

  1. Power Supply Requirements:

    • Ensure the input voltage is at least 1.5V higher than the desired output voltage to maintain regulation.

  2. Output Capacitor:

    • Connect a capacitor of at least 0.1μF directly across the output terminals for stability.

  3. Ground Connection:

    • Make sure the ground connections are solid and have low impedance to avoid noise and instability issues.

  4. Thermal Considerations:

    • The device can operate within an ambient temperature range of -40°C to +85°C. For applications outside this range, ensure adequate thermal management.

  5. Load Regulation:

    • To minimize load regulation errors, keep the load current within specified limits and use appropriate decoupling capacitors if necessary.

  6. Initial Setup:

    • Verify the initial accuracy and adjust external components if required for precise voltage settings.

  7. Long-Term Stability:

    • Regularly monitor the output voltage over time to ensure it remains within acceptable limits as specified by the long-term stability parameter.

  8. Handling Precautions:

    • Handle with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection practices during installation and handling.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag