Description
BUY TC74HC165AP https://www.utsource.net/itm/p/1700621.html
Three Line EMI Filter; Package: 8 Pin Flip-Chip, 1.55x1.55 mm, 0.5 Pitch; No of Pins: 8; Container: Tape and Reel; Qty per Container: 3000
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
Operating |
2.0 |
|
5.5 |
V |
| Input Low Voltage |
VIL |
IOL = 1.0 mA |
|
0.8 |
|
V |
| Input High Voltage |
VIH |
IOH = -0.4 mA |
|
2.0 |
|
V |
| Output Low Voltage |
VOL |
IO = 4.0 mA |
|
0.1 |
|
V |
| Output High Voltage |
VOH |
IO = -0.4 mA |
|
4.7 |
|
V |
| Propagation Delay Time |
tpd |
VCC = 5V, TA = 25掳C |
|
29 |
|
ns |
| Power Consumption |
ICC |
VCC = 5V, f = 1 MHz |
|
20 |
|
渭A |
Instructions for TC74HC165AP
Power Supply Connection:
- Connect the VCC pin to a power supply within the operating voltage range (2.0V to 5.5V).
- Ensure the GND pin is connected to the ground.
Signal Input Handling:
- For valid low input signals, ensure the input voltage does not exceed 0.8V.
- For valid high input signals, ensure the input voltage is at least 2.0V.
Output Signal Handling:
- When driving loads from the output pins, ensure that the output low voltage does not exceed 0.1V when sourcing up to 4.0mA.
- The output high voltage should be at least 4.7V when sinking up to 0.4mA.
Timing Considerations:
- Be aware of the propagation delay time which is typically 29ns under standard conditions (VCC = 5V, TA = 25掳C).
Power Consumption:
- The device consumes approximately 20渭A at VCC = 5V and a frequency of 1 MHz.
Handling and Storage:
- Store in a dry environment and handle with care to avoid damage from electrostatic discharge (ESD).
Application Notes:
- Refer to the manufacturer's datasheet for detailed application circuits and advanced usage scenarios.
(For reference only)
More detail about Utsource Holding Company Limited
