74HC4028AF: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY 74HC4028AF https://www.utsource.net/itm/p/1143656.html
4-bit x 16-word FIFO register

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.0	-	6.0	V	Operating supply voltage range
Input Voltage (High)	VIH	3.5	-	VCC	V	Minimum input voltage for logic high
Input Voltage (Low)	VIL	0	-	1.5	V	Maximum input voltage for logic low
Output Voltage (High)	VOH	2.4	-	VCC	V	Minimum output voltage for logic high
Output Voltage (Low)	VOL	0	-	0.1	V	Maximum output voltage for logic low
Input Leakage Current	IIH	-	1	-	渭A	Typical leakage current at input pin
Output Drive Current	IOH	-	4	-	mA	Typical output drive current for logic high
Propagation Delay Time	tpd	-	12	-	ns	Typical propagation delay time
Power Dissipation	PD	-	-	100	mW	Maximum power dissipation

Supply Voltage: Ensure the supply voltage (VCC) is within the specified range of 2.0V to 6.0V.
Input Levels: Inputs should be set to either a valid logic low (VIL) or logic high (VIH) level as defined in the table.
Output Levels: Outputs will provide either a valid logic low (VOL) or logic high (VOH) level depending on the internal state.
Current Handling: Be aware of the typical input leakage current and ensure external circuitry can handle the specified output drive current.
Timing Considerations: Account for the propagation delay time when designing circuits that depend on timing.
Power Management: Do not exceed the maximum power dissipation rating to avoid overheating and potential damage.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed specifications and guidelines.

(For reference only)