LPF-120W: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Winston Resources

Penerangan

Features:
·Universal AC input range/Full range
·Built-in active PFC function
·Protections: Short circuit / Over load/Over voltage/Over temperature
·Cooling by free air convection
·Class II power unit
·IP67 design for indoor or outdoor installations
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lighting
·Suitable for dry / damp / wet locations
·3 years warranty

Model		LPF-120-5000	LPF-120-3400	LPF-120-2500	LPF-120-2100
Output	DC voltage	24V	36V	48V	54
	Constant current region	16~24V	24~36V	32~48V	32~54V
	Rated current	5000mA	3400mA	2500mA	2100mA
	Rated power	120W	122.4W	120W	113.4W
	Ripple&noise (max.)	3.6Vp-p	4.5Vp-p	4.6Vp-p	4.8Vp-p
	Voltage tolerance	±5.0%
	Current tolerance	±5.0%
	Line regulation	±3.0%
	Load regulation	±5.0%
	Setup time	1200ms/115VAC,500ms/230VAC(Full load)
Input	Voltage range	90～264VAC 47～63Hz，127～370VDC
	AC current （Typ.）	0.8A/115VAC 0.4A/230VAC
	Efficiency	89%	90%	91%	91%
	Power factor	PF>0.9/230VAC ,PF＞0.92/115VAC(at full load)
	Inrush current	Cold start current 40A/230VAC
	Leakage current	＜0.75mA/240VAC
Protection	Overload	95~110% rated output power
	Overload	Protection type : Constant current limiting, recovers automatically after fault condition is removed
	Over voltage	30~ 33V	44~ 47V	52~ 62V	63~68V
	Over voltage	Protection type : Shut down o/p voltage, re-power on to recover
	Short circuit	Hiccup mode, recovers automatically after fault condition is removed
	Over temperature	90℃±10℃(RTH2) Protection type : Shut down o/p voltage, re-power on to recover
Environment	Working temp, humidity	-30℃～+50℃,20%~90%RH non-condensing
	Storage temp,humidity	-40℃~+80℃,10%~95%RH non-condensing
	Temp. coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	10~500HZ,2G 10min/1cycle,period for 60min, X.Y.Z each axes
Safety&EMC	Safety standard	UL8750, TUV EN61347-1,EN61347-2-13，UL60950-1,IP67 Certificated
	Withstand voltage	I/P-O/P：3KVAC ,I/P-FG:1.5KVAC,O/P-FG:0.5KVAC
	Isolation resistance	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC interference	Compliance to EN55015,EN61000-3-2 Class C(≥65% Load)
	EMC emission	Compliance to EN61000-3-2 Class C(≥75% Load); EN61000-3-3
	EMC immunity	Compliance to EN61000-4-2 ,3,4,5,6,8,11; ENV50204,EN55024,EN61547,light industry level (surge 4KV), criteria B
Others	MTBF	420K hrs min. MIL-HDBK-217F (25℃)
	Dimension	2044934mm(LWH)
	Packing	0.62kg/30pcs/19.5kg/0.027 m³/0.95CUFT

NOTE:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 ℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
5.Derating may be needed under low input voltage. Please check the static characteristics for more details.
6.Setup time is measured at cold start condition. Turning ON/OFF the power supply frequently may increase the set up time.
7.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will
be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

Lebih maklumat tentang Winston Resources