TS Series 5 kW to 45 kW: Pilihan Utama di Malaysia, Singapore, Penang, Johor Bahru (JB), Selangor, Sarawak, Kuala Lumpur (KL) ELSO Technologies Sdn Bhd

Penerangan

Features

High Frequency IGBT-based Switch-Mode Design

The TS Series utilizes the latest IGBT devices to drive down size and increase performance. The high frequency design delivers fast transient response and low output ripple. This performance coupled with Magna-Power's rugged current-fed power processing, enables confidence in even the most demanding applications.

Fully Programmable Power

All TS Series functions and features of are available and programmable from a variety of control methods, including:

Stepless front panel knobs
37-pin isolated analog-digital I/O
Computer interface with software and drivers

Various programming interfaces are available, such as LXI TCP/IP Ethernet (+LXI), IEEE-488 GPIB (+GPIB), Edgeport USB, Accessory (+USB), RS485 Accessory (+RS485).

Model Ordering Guide

Models Chart

The following chart details the available standard TS Series models. The Current Maximum (Adc) column is separated by the available power levels. To determine the appropriate model, first select your output Voltage Maximum (Vdc) to find appropriate row. Next, select one desired Current Maximum from the row that contains your desired Voltage Maximum. Then, construct your model number according to the model ordering guide, above. Non-standard voltage and current configurations are available.

5 kW	10 kW	15 kW	20 kW	25 kW	30 kW	45 kW
Voltage Maximum	Current Maximum							Ripple (mVrms)	Eff. (%)
5	900	1800*	2700*	N/A	N/A	N/A	N/A	50	86
8	600	1200*	N/A	N/A	N/A	N/A	N/A	40	86
10	500	900	1800*	N/A	2700*	N/A	N/A	40	86
16	300	600	900	1200	1500	1800	2700	35	86
20	250	500	750	1000	1250	1500	2250	40	86
25	200	400	600	800	1000	1200	1800	40	86
32	150	300	450	600	750	900	1350	40	86
40	125	250	375	500	625	750	1125	40	87
50	100	200	300	400	500	600	900	50	87
60	83	166	249	342	415	498	747	60	87
80	62	124	186	248	310	372	558	60	87
100	50	100	150	200	250	300	450	60	87
125	40	80	120	160	200	240	360	100	87
160	31	62	93	124	155	186	279	120	87
200	25	50	75	100	125	150	225	125	87
250	20	40	60	80	100	120	180	130	88
300	16	32	48	64	80	96	144	160	88
375	13	26	39	52	65	78	117	170	88
400	12	24	36	48	60	72	108	180	88
500	10	20	30	40	50	60	90	220	88
600	8	16	24	32	40	48	72	250	88
800	6	12	18	24	30	36	54	300	88
1000	5	10	15	20	25	30	45	350	88
1250	4	8	12	16	20	24	36	375	88
1500	3.3	6.6	9.9	13.2	16.5	19.8	29.7	400	88
2000	2.5	5.0	7.5	10.0	12.5	15.0	22.5	450	88
3000	1.6	3.2	4.8	6.4	8.0	9.6	14.4	500	88
4000	1.2	2.4	3.6	4.8	6.0	7.2	10.8	550	88
	Input Current Per Phase (Aac)
208/240 Vac, 1Φ	38	N/A	N/A	N/A	N/A	N/A	N/A
208/240 Vac, 3Φ	19	36	54	72	90	108	162
380/415 Vac, 3Φ	10	21	30	40	50	60	90
440/480 Vac, 3Φ	9	18	27	36	45	54	81

Specifications

Input
Nominal Voltage 3 phase, 3 wire + ground	208 VAC (operating range 187 - 229 VAC) 240 VAC (operating range 216 - 264 VAC) 380 VAC (operating range 342 - 440 VAC) 415 VAC (operating range 373 - 456 VAC) 440 VAC (operating range 396 - 484 VAC) 480 VAC (operating range 432 - 528 VAC)
1 phase, 2 wire + ground (5 kW models only)	208 VAC (operating range 187 - 229 VAC) 240 VAC (operating range 216 - 264 VAC)
Frequency	50 through 400 Hz (operating range 45 Hz to 440 Hz)
Power Factor	Greater than 92% at maximum power for 3 phase models, Greater than 70% at maximum power for 1 phase models.

Output Specifications
Ripple	See Model Charts
Line Regulation	Voltage Mode: ± 0.004% of full scale Current Mode: ± 0.02% of full scale
Load Regulation	Voltage Mode: ± 0.01% of full scale Current Mode: ± 0.04% of full scale
Load Transient Response	2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change
Efficiency	≥ 86% (See Model Charts)
Stability	± 0.10% for 8 hrs. after 30 min. warmup
Isolation	User inputs and outputs: referenced to earth ground. Maximum input voltage to ground: ±2500 Vac Maximum output voltage to ground: ±1000 Vdc for models less than or equal to 1000 Vdc, ±(2000 Vdc + Vo/2) for models greater than 1000 Vdc or with High Isolation Output Option (+ISO) where Vo is the maximum output voltage of the power supply.
Maximum Slew Rate	Standard Models: 100 ms for an output voltage change from 0 to 63%, 100 ms for an output current change from 0 to 63%. With High Slew Rate Option (+HS): 4 ms for an output voltage change from 0 to 63%, 8 ms for an output current change from 0 to 63%.
Bandwidth	Standard Models: 3 Hz with remote analog voltage programming, 2 Hz with remote analog current programming. With High Slew Rate Option (+HS): 60 Hz with remote analog voltage programming, 45 Hz with remote analog current programming.

Physical Specifications
Power	Size (H" x D" x W")	Rack Units	Weight
5 kW	5¼" x 24" x 19" (13.34 x 60.96 x 48.26 cm)	3U	74 lbs (34.57 kg)
10 kW	5¼" x 24" x 19" (13.34 x 60.96 x 48.26 cm)	3U	94 lbs (42.64 kg))
15 kW	5¼" x 24" x 19" (13.34 x 60.96 x 48.26 cm)	3U	125 lbs (56.70 kg)
20 kW	10½" x 24" x 19" (26.67 x 60.96 x 48.26 cm)	6U	195 lbs (88.45 kg)
25 kW	10½" x 24" x 19" (26.67 x 60.96 x 48.26 cm)	6U	220 lbs (99.79 kg)
30 kW	10½" x 24" x 19" (26.67 x 60.96 x 48.26 cm)	6U	245 lbs (111.13 kg)
45 kW	15¾" x 24" x 19" (40.01 x 60.96 x 48.26 cm)	9U	365 lbs (165.56 kg)

Control Specifications
Voltage Programming Accuracy	± 0.075% of full scale voltage
OVT Programming Accuracy	± 0.075% of full scale voltage
Current Programming Accuracy	± 0.075% of full scale current
OCT Programming Accuracy	± 0.075% of full scale current
Voltage Readback Accuracy	± 0.2% of full scale voltage
Current Readback Accuracy	± 0.2% of full scale current
External Analog Programming and Monitoring Levels	0 - 10 Vdc
External Analog Output Impedances	Voltage output monitoring: 100 Ω Current output monitoring: 100 Ω +10 Vdc reference: 1 Ω
External Digital Programming and Monitoring Limits	Input: 0 to 5 Vdc, 10 kΩ input impedance Output: 0 to 5 Vdc, 5 mA drive capacity
Remote Sense Limits	3% maximum voltage drop from output to load

Environmental
Operating Temperature	0°C to 50°C
Storage Temperature	-25°C to +85°C
Ambient Temperature	0 to 50°C
Temperature Coefficient	0.04%/°C of maximum output voltage, 0.06%/°C of maximum output current.
Air Cooling (Standard)	Side air inlet, rear exhaust
Water Cooling (Optional)	25°C maximum inlet temperature 1.5 GPM minimum flow rate for 15 kW units 3.0 GPM minimum flow rate for 20-30 kW units 4.5 GPM minimum flow rate for 45 kW units 80 PSI maximum pressure 1/4” NPT female pipe size

Lebih maklumat tentang ELSO Technologies Sdn Bhd