(MICHAUD) Cutout Sleeve

(MICHAUD) Cutout Sleeve

Kategori: LV Protection Tersedia
Untuk maklumat lanjut, lawati laman web rasmi kami di teknobumi.com.my

Penerangan

Application
 

This cutout sleeve is designed to receive a fuse cartridge, a neutral tube or a 22x58 mini-switch. It is used in no mechanical load situations.
It is equipped with mechanical tightening terminals allowing its implementation using a simple spanner. Opening and closing of the cutout can be performed under load.



Description
 
  • Connection is established using insulation piercing technology for the K 221 and stripping technology for the K 219. The tightening screws are equipped with shear heads.
  • The terminals offer the following capacities:
    • 6-35mm² Al/Cu or 16M-50M Al for the K 221,
    • 16-35mm² Al/Cu or 16M-50M Al for the K 219.
  • The product has a dielectric strength in water greater than 6kV.
  • The elastic tightening on the cartridge is calibrated so that when the cutout is opened, the cartridge remains on the customer side (therefore without voltage).
  • A sealing cap temporarily protects the access on the network side.
  • Once the cartridge has been installed, the product is locked using a sealable ring.
  • The sealable ring and the 13mm screw can be sealed.
  • The sleeve accepts 63A fuses. The 100A fuse is only accepted with 35mm² copper wiring.


If there are any inquiries, please leave your message below.

Lebih maklumat tentang Tekno Bumi Sdn Bhd
Tekno Bumi Sdn Bhd
Tekno Bumi Sdn Bhd Telecommunication Cable Supplier Selangor, Malaysia, Energy Cable Supply Kuala Lumpur (KL), Railway Facilities Projects ~ Tekno Bumi Sdn Bhd