Comet P8652 Specifications |
Technical parameters |
Value |
Output |
Ethernet |
Measured Value |
Temperature + Relative Humidity |
Construction Type |
For External Probes |
Design |
Industrial |
Temperature Measuring Range |
-55 to 100 °C |
Relay Output |
No |
Two-State Input |
Yes |
Lcd Display |
No |
PoE |
Yes |
Accuracy with DSTR162/C, DSTGL40/C, DSTG8/C probe |
±0.5°C from -10 to +80°C, else ±2°C |
Accuracy with DSRH01, DSRH02, DSRH05 probe |
±3.5% RH (10% – 90% RH) at 25°C, ±2°C |
Measuring temperature range with DSTR162/C, DSTGL40/C probe |
-30 to +80°C |
Measuring temperature range with DSTG8/C probe |
-50 to +100°C |
Measuring relative humidity range with DSRH01, DSRH02, DSRH05 probe |
0 to 100%RH (not condensing) |
Measuring temperature range with DSRH01, DSRH02, DSRH05 probe |
0 to +50°C |
Resolution |
0.1°C, 0.1%RH |
Measuring interval |
2s |
Supported units |
degrees Celsius, degrees Fahrenheit, percent of Relative humidity |
Temperature operating range |
-20 až +60°C |
IP protection |
IP30 |
Number of binary inputs |
3 |
Galvanic isolation of binary inputs |
no |
Type of binary inputs |
dry contact/voltage contact |
LAN connection |
RJ-45 connector, 10Base-T or 100Base-TX |
Communication protocols |
WWW, ModbusTCP, SNMPv1, SOAP, XML |
Protocols for alarms |
E-mail, SNMP Trap, Syslog |
Configuration |
T-Sensor, WWW configuration |
Power |
Power over Ethernet according to IEEE 802.3af or 5Vdc, maximum consumption 1W |
Power connector |
co-axial, diameter 5.5 x 2.1 mm |
Dimensions |
88 x 74 x 39.5 mm (W x H x D) |
Weight |
approximately 145g |