Measurement of belt loading and mass flow in a thermal sludge drying facility
Application
To minimize the sludge volume, water is evaporated from the sludge in the thermal drying facility. Under a stream of hot air at +80° to +130° C, the sewage sludge is dried in a belt drier.
Recommended Products
VEGAMET 391
Power supply for sensor, measurement data processing and display
Simple regulation and control of level and pressure measuring instruments
Analogue and digital outputs for connection to process control systems
Large measured value display
Protection rating
IP 20/IP 65
Input
1 x 4 … 20 mA/HART sensor input
with transmitter power supply
Output
1 x 0/4 … 20 mA current output
up to 6 x operating relay
1 x fail safe relay
1 x Ethernet or 1 x RS232
MiniTrac 31
Continuous monitoring of belt charging
Non-contact measurement of the sludge level in the dryer
Malaysia
