After being crushed, screened and sorted into different grain sizes, the gravel and sand are transported on conveyors and stored in large stockpiles. To automate the stockpiling levels and enable the optimum area to be filled, a reliable level measurement is essential.
Your benefit
Reliable
Reliable measurement is ensured in all weather conditions
Cost effective
Optimum utilization of stockpile capacity
User friendly
Maintenance-free operation
Recommended products
VEGAPULS 69
Non-contact stockpile monitoring with radar
Reliable stockpile control, unaffected by material flow and weather conditions
Maintenance-free operation, thanks to non-contact measurement
Optimal monitoring of the filling process at the stockpile
Measuring range - Distance
120 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 20 bar
VEGACAP 65
The capacitive cable probe protects the discharge conveyors from damage through material contact
Shortenable probes enable high flexibility
Long service life and low maintenance requirements through robust design
Reliable switching point ensured through large sensing weight
Process temperature
-50 ... 200 °C
Process pressure
-1 ... 64 bar
Version
Cable ø 6 mm with screening tube without weight
Cable ø 6 mm with screening tube and gravity weight
Cable ø 6 mm with gravity weight
Cable ø 8 mm with abrasion protection without weight
Cable ø 8 mm with abrasion protection and gravity weight
Cable ø 8 mm with gravity weight
PA cable ø 12 mm with screening tube and gravity weight