Application
A vacuum system is used to perform dewatering on the high-speed paper machines. The required high vacuum is generated by a single or multi-stage centrifugal blower. The strength of the vacuum is regulated by the rotational speed of the electric drives. For this purpose, the vacuum must be continuously measured. It is also necessary to monitor the bearing lubrication system to ensure reliable operation of the vacuum blower itself. To achieve this, the pressure in the lubricating lines and the level in the lube oil supply tank need to be measured.
Your benefit
Reliable
Reliable pressure measurement in the lubrication system, even with strong vibration
Cost effective
Long-term stable vacuum measurement with oil-free ceramic measuring cell
User friendly
Temperature information on air and lubricating oil also available for the control system
Recommended products
VEGABAR 82
Pressure measurement for speed control of the pump drive
- Long-term stable vacuum measurement with dry measuring cell
- Air and lubricating oil temperature information also available from the transmitter for the control System
- Reliable operation through high overload resistance
Measuring range - Distance
Measuring range - Pressure
VEGACAL 63
Capacitive level measurement in the oil supply tank
- Economical level measurement through use of low-cost transmitter
- Long service life thanks to robust mechanical design
- Maximum tank utilization, as probe measures over its entire length
Measuring range - Distance
Malaysia
