KYORITSU KEW 1062: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Mobicon

Penerangan

High Accuracy, High Performance and Reliable Measurements

• 0.02% basic DC accuracy
• Large display with 50,000 counts
• Dual display for double indication for AC and DC, V and Hz, etc.
• True-RMS Measurements AC and AC+DC
• Wide AC Frequency bandwidth from 10Hz to 100kHz
• True-RMS or MEAN value detection mode can be selected
• Fast Peak Hold response time of 250µs
• Low-pass filter for motor drive measurements
• Low Power Ω for resistance measurements on sensible electronic circuits by a low and safe test current
• User calibration function

Safety design for industrial use
• Complies with IEC 61010-1 CAT IV 600V, CAT III 1000V
• Terminal shutter to prevent incorrect test leads' insertion in current terminals
• Very wide operating temperature range from -20 to 55ºC

Reliable support for data management
• Large data internal memory
KEW 1062: 10,000 data (logging), 100 data (manual)
• Download data and Live Monitoring on a PC via the USB interface
(Option for USB Communication set)
* MAX 32,767 data can be transferred.

Detection mode	MEAN/RMS (switch)
DC V	50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V (Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V]) ±0.02%rdg±2dgt (Basic accuracy)
AC V [RMS]	50.000/500.00mV/5.0000/50.000/500.00/1000.0V (Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V]) ±0.4%rdg±30dgt (Basic accuracy)
AC V [MEAN]	50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V (Input impedance:11MΩ<50pF [50/500mV/5V],10MΩ<50pF [50/500/1000V]) ±1%rdg±30dgt (Basic accuracy)
DCV+ACV	5.0000/50.000/500.00/1000.0V (Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V]) ±0.5%rdg±10dgt (Basic accuracy)
DC A	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A ±0.2%rdg±5dgt (Basic accuracy)
AC A [RMS]	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A ±0.75%rdg±20dgt (Basic accuracy)
AC A [MEAN]	500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A ±1.5%rdg±20dgt (Basic accuracy)
DCA+ACA	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A ±1%rdg±10dgt (Basic accuracy)
Ω	500.00Ω/5.0000/50.000/500.00kΩ/5.0000/50.000MΩ ±0.05%rdg±2dgt (Basic accuracy)
LowPower-Ω	5.000/50.00/500.0kΩ/5.000MΩ ±0.2%rdg±3dgt (Basic accuracy)
Continuity buzzer	500.0Ω (The buzzer turns on for resistances lower than 100±50Ω)
Diode test	2.4000V ±1%rdg±2dgt Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current)
Capacitance	5.000/50.00/500.0nF/5.000/50.00/500.0µF/5.000/50.00mF ±1%rdg±5dgt (Basic accuracy)
Frequency	2.000 - 9.999/9.00 - 99.99/90.0 - 999.9Hz/0.900 - 9.999/9.00 - 99.99kHz ±0.02%rdg±1dgt (Basic accuracy)
DUTY	10 - 90% ±1%rdg
Temperature	-200 - 1372ºC ±1%rdg±1.5ºC -328 - 2501.6ºF ±1%rdg±2.0ºF (with the use of K-type Temperature probe)
Measurement functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω
Other functions	Data Hold (D/H), Auto Hold (A/H), Peak Hold (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN), Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight
Applicable standards	IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2, IEC 61010-031, IEC 61326-1 (EMC)
Power source	R6 (1.5V)×4 (Auto power off: approx. 20 minutes)
Dimensions	192(L)×90(W)×49(D) mm
Weight	Approx. 560g (including batteries)
Included Accessories	7220A (Test leads), R6×4, Instruction manual, 8926 (Fuse [440mA/1000V])×1 (included) 8927 (Fuse [10A/1000V])×1 (included)

Option

Description		Model	Specification
Crocodile clip test lead		7234	CAT IV 600V, CAT III 1000V
AC/DC Clamp Sensor		8115	AC 130A / DC 180A
Clamp sensor		8121	AC 100A
		8122	AC 500A
		8123	AC 1000A
		8146	AC 30A
		8147	AC 70A
		8148	AC 100A
Banana Ø4mm Adjuster Plug		7146	length:190mm
USB Communication set		8241	USB adaptor + USB cable + DMM Software
DMM Printer full set		8249	8243＋8246＋8248
	Printer Communication set	8243	Printer Adapter + RS232 cable
	Printer	8246	Printer + Thermal paper (1 roll)
	AC adapter for printer [EU]	8248A	AC230V±10%
Thermal paper for printer		8247	10 rolls
Carrying case		9154	for the main unit with testi leads and communication cable

Thermocouple Type K Specification

Description	Model	Specification
Temperature probes	8405	-40ºC - 500ºC (Surface type, Point material: Ceramic)
	8406	-40ºC - 500ºC (Surface type)
	8407	-40ºC - 700ºC (Liquid, Semi-solid)
	8408	-40ºC - 600ºC (Air, Gas)

Product Catalogue

KEW1051/1052/1061/1062 Product Catalogue (2.22 MB)

Lebih maklumat tentang Mobicon - Remote Electronic Sdn Bhd