AquaEdge® High-Efficiency Semi-Hermetic Centrifugal Chiller 19XR: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Singapore, Puchong, Petaling Jaya (PJ), Pandan Jaya United Faith Sdn Bhd

Penerangan

Single-Stage (200 to 1,600 Tons)

--Constant Speed
--Variable-Speed (19XRV)

Two-Stage (600 to 3,400 Tons)

--Constant Speed
--Variable-Speed (19XRV)

The AquaEdge® 19XR/XRV centrifugal chillers achieve energy efficiency levels using proven technology designed specifically for chlorine-free refrigerant. This combination ensures the most cost-effective, reliable solution for today's comfort cooling and process cooling applications.

Carrier's AquaEdge® chillers offer the best value in high-efficiency, chlorine-free centrifugal HVAC chillers.

Water-cooled chillers within the scope of the AHRI WCCL certification program are certified in accordance with the AHRI Water-Cooled Water-Chilling and Heat Pump Water-Heating Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units may be found in the AHRI Directory at www.ahridirectory.org.

Performance Features

IPLV to 0.31 (19XRV)
Chlorine-free HFC-134a refrigerant
Semi-hermetic compressor motor
Low energy consumption during part load and full load operation
Aerodynamically contoured impeller
Multilingual display
Compatible with Carrier Comfort Network® (CCN) communication link
Economized two stage compressor 19XR two-stage units)

Reliability Features

ASME constructed heat exchangers
Single-stage 200-1600 tons (703 to 5627 kW) or two-stage 600-3400 tons (2110 to 11957 kW) positive pressure design
Low voltage control circuits
Lowest industry refrigerant leakage rate at less than 0.1% per year
Semi-hermetically sealed compressor, motor, and transmission
Automated controls may be tested before start-up
Refrigerant-cooled, unit-mounted variable frequency drive (19XRV)

Maintenance Features

Password protected extensive service menu with built-in diagnostic capabilities, troubleshooting, and corrective action recommendations for preset alarms
Alarm and alert files maintain the last 25 time and date stamped messages in memory
Configuration data backup with non-volatile memory
Thermistor-type temperature sensor with quick connects in each water nozzle
Refrigerant isolation valves for in-chiller refrigerant storage (factory-installed option)
Unit-mounted pumpout unit for storing refrigerant inside the chiller during servicing (factory-installed option)
Service contract available

Installation Features

Low voltage control circuits
Refrigerant cooled unit mounted VFD
Less than 0.1% refrigerant leakage rate per year - lowest in the industry
Semi-hermetically sealed compressor, motor, and transmission
Automated controls test on start-up

Factory-Installed Options

Enhanced tubing, .028 or .035 in. (0.711 or 0.889 mm):
- Internally/externally enhanced copper tubing - evaporator/condenser
- Internally/externally enhanced cupronickel tubing - condenser
- Smooth bore/externally enhanced copper tubing - evaporator/condenser
- Smooth bore/externally enhanced cupronickel tubing - condenser
Titanium condenser tubes, .025 or .028 in. (0.635 or 0.711 mm):
- Internally enhanced tubes
Marine waterboxes
- 150 psig (1034 kPa) waterbox
- 300 psig (2068 kPa) waterbox, ASME certified
Marine bolt-on waterboxes for condenser, 150 psig (1034 kPa) with titanium clad tubesheets (available on condenser frame sizes 2 to 8 and A to D)
Nozzle-in-head waterbox, 300 psig (2068 kPa)
Flanged evaporator and/or condenser waterbox nozzles
Waterbox hinges
Unit-mounted, low-voltage wye-delta or solid-state starters (Heat exchanger frames 1-7 only)
One, 2, or 3 pass evaporator or condenser waterside construction
Zinc anodes
BACnet® Communications
Refrigerant isolation valves
Shipped factory charged with refrigerant
Unit-mounted pumpout unit
Hot gas bypass
Unit-mounted refrigerant-cooled variable frequency drive
Thermal insulation (except waterbox covers)
Customer factory performance testing
Export crating
Discharge line sound reduction kit
Seismic Kit
Extended Warranty (North America only)
Service Contract

Field-Installed Accessories

BACnet® Carrier Translator
LonWorks® Carrier translator
Sensor package
Separate storage tank and pumpout unit
Stand-alone pumpout unit
Soleplate package
Spring isolator kit
Acoustical sound insulation kit
Freestanding Low Voltage Wye-Delta & Solid Starters
Freestanding Low Voltage Variable Frequency Drives
Freestanding Medium Voltage Variable Frequency Drives

Heat Exchanger Size†	Length with Nozzle-in-Head Waterbox				Width		Height **
	2-Pass*		1 or 3-Pass		Width		Height **
	ft-in.	mm	ft-in.	mm	ft-in.	mm	ft-in.	mm
10 to 12	11-4	3454	11-11	3632	5-2 7/8	1597	6-1 1/4	1861
15 to 17	13-7 1/2	4153	14-2 1/2	4331	5-2 7/8	1597	6-1 1/4	1861
20 to 22	11-4 3/4	3473	11-11 3/4	3651	5-6 7/8	1688	6-3 1/4	1911
30 to 32	13-8 1/4	4172	14-3 1/4	4350	5-6 7/16	1688	6-3 1/4	1911
35 to 37	15-4 3/4	4693	15-11 3/4	4870	5-6 7/16	1688	6-3 1/4	1911
40 to 42	14-3 1/8	4347	14-9	4496	6-3 1/8	1908	7-0 3/4	2153
45 to 47	15-8 5/8	4867	16-5 1/2	5017	6-3 1/8	1908	7-0 3/4	2153
50 to 54, 5K to 5R	14-4 1/2	4382	14-10	4521	6-6 1/2	1994	7-1	2159
5A to 5C	14-4 1/2	4382	14-10	4521	6-6 1/2	1994	7-1	2159
55 to 59, 5T to 5Z	16-1	4902	16-6 1/2	5042	6-6 1/2	1994	7-1	2159
5F to 5H	16-1	4902	16-6 1/2	5042	6-6 1/2	1994	7-1	2159
60 to 64, 6K to 6R	14-5 1/4	4401	14-11	4547	6-11 5/8	2124	7-4 7/8	2257
65 to 69, 6T to 6Z	16-1 3/4	4921	16-7 1/2	5067	6-11 5/8	2124	7-4 7/8	2257
70 to 74, 7K to 7R	16-6 1/8	5032	17-0 1/2	5194	8-1 1/4	2470	9-9 1/2	2985
75 to 79, 7T to 7Z	18-6 1/8	5642	19-0 1/2	5804	8-1 1/4	2470	9-9 1/2	2985
80 to 84, 8K to 8R	16-9 1/8	5109	17-3 1/2	5271	8-10 3/4	2711	9-11 1/4	3029
85 to 89, 8T to 8Z	18-9 1/8	5718	19-3 1/2	5880	8-10 3/4	2711	9-11 1/4	3029

*Assumes all customer connections are on the same end of the chiller.

**Height is for chiller without unit-mounted starter.

†Heat exchangers are rated for typical applications at AHRI Conditions (44°F leaving chilled water and 54 F entering in the evaporator, and 85°';F entering condenser water with 94.3 leaving condenser water in the condenser).

19XR Dimensions - Two-Stage Compressor Frame Sizes 6 & 7 (Dished Head Waterbox)

Cooler Heat Exchanger Size	Condenser Heat Exchanger Size	A (Length, Dished Head Waterbox)						19XR B Width		19XR C Height
		1-Pass		2-Pass		3-Pass		19XR B Width
		ft-in.	mm	ft-in.	mm	ft-in.	mm	ft-in.	mm
A4*	A4*	17-8	5385	17-6.75	5353	17-6.75	5353	10-3.13	3127	See Note 6
A6*	A6*	19-8	5994	19-6.75	5962	19-6.75	5962	10-3.13	3127
A4*	B4*	17-8	5385	17-7.38	5369	17-7.38	5369	10-8.5	3264
A6*	B6*	19-8	5994	19-7.38	5978	19-7.38	5978	10-8.5	3264
B6*	C6*	20-0	6096	19-11.18	6074	19-9	6120	12-0.63	3674
B8*	C8*	22-0	6096	21-1.18	6684	21-9	6629	12-5.5	3797
C6*	C6*	20-4.25	6204	19-11.18	6074	19-11.75	6090	12-5.5	3797
C6*	D6*	20-4.25	6204	20-0	6096	20-0.5	6109	13-2	4013
C8*	D8*	20	6096	21-11.125	6684	21-9	6629	13-2	4013

*Assumes both cooler and condenser nozzles on same end of chiller.
Note 6. 19XR heights can vary depending on the configuration. Check 19XR certified drawings for height information.

Lebih maklumat tentang United Faith Sdn Bhd