AquaSnap® Indoor Water-Cooled:Condenserless Liquid Chiller 30MP: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Singapore, Puchong, Petaling Jaya (PJ), Pandan Jaya United Faith Sdn Bhd

Penerangan

with Puron® Refrigerant (R-410A)

16 to 71 Nominal Tons

30MPA - Condenserless Chiller
30MPW - Packaged Chiller

AquaSnap® 30MP packaged liquid and condenserless chillers feature a compact modular design that makes them ideal for easy replacement, retrofit, or new construction applications.

Water-cooled chillers within the scope of the AHRI WCCL certification program are certified in accordance with the AHRI Water-Cooled Water-Chilling and Heat Pump Water-Heating Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units may be found in the AHRI Directory at www.ahridirectory.org. Condenserless versions of these units and 50 Hz. units below 200 Tons are not certified under the AHRI certification program.

Performance Features

ASHRAE 90.1 compliant
ComfortLink™ microprocessor-based controls
High-efficiency scroll compressor
Quiet, reliable operation
Easy-to-use controls
Energy management module minimizes chiller energy consumption (factory-installed option or field-installed accessory)
Scrolling marquee display shows operating parameters in plain language
Heat recovery capability up to 140°F (60°C)
Modular capability to install up to eight (8) modules together to reach capacities up to 560 tons

Reliability Features

Thermostatic expansion valves (016-045 models)
Electronic expansion valves (050-071 models)
Hermetic-type filter driers
Loss of refrigerant charge protection
Low control voltage (to unit) protection
Thermal overload protection
Pressure overload
Electrical overload through the use of definite-purpose contactors and calibrated, ambient compensated, magnetic trip circuit breakers
Standard 60 Hz unit listed with ETL and ETL, Canada, and built in accordance with ASME requirements

Maintenance Features

Over 15 diagnostic functions
Moisture indicating sight glasses

Installation Features

Single point electrical connection
Shipped with R-410A (30MPW ) or nitrogen (30MPA) holding charge
Fits through standard 36-in. doorway
Factory-assembled and shipped with complete internal piping and wiring and essential controls and protective devices
Control power transformer
Dual circuit, single module (32-ton module)

Factory-Installed Options

Unit-mounted, non-fused disconnect
Medium temperature brine operation
EMM (energy management module)
Sound enclosure panels
Hot gas bypass
Non-fused disconnect
Medium temperature brine
Mobility package (wheels)
Condenserless unit
Height adjustment (leveling) kit
BACnet Communication
Digital scroll compressor (020-045 Models)
Water manifold piping
Electrical distribution panel with breakers for up to four (4) separate 30MP modules

Field-Installed Accessories

EMM (energy management module)
Sound enclosure panels>
Hot gas bypass
Vibration isolators (resilient pads)
Vibration isolators (springs)
BACnet translator
LON (local operating network) translator control
Mobility package (wheels)
Condenser water temperature sensors
Height adjustment (leveling) kit
Compressor return gas sensor
Bronze Y strainer
Navigator™ display module
Remote enhanced display
Victaulic spacer kit (for water manifold piping)
Multi-unit controller

30MP Unit Size	Capacity		Input Power (kW)	Evaporator Flow		Evaporator Pressure Drop		Condenser Flow		Condenser Pressure Drop
30MP Unit Size	Tons	kW	Input Power (kW)	gpm	L/s	Ft of Water	kPa	gpm	L/s	Ft of Water	kPa
016	15.02	52.8	11.3	36.1	2.3	13.9	41.6	45.1	2.8	7.7	23.0
020	20.46	72.1	15.3	49.1	3.1	11.3	33.8	61.4	3.9	13.4	40.1
030	31.31	110.1	23.5	75.1	4.7	14.6	43.7	93.9	5.9	7.9	23.6
032	32.06	112.9	23.8	76.9	4.9	6.6	19.7	96.2	6.1	4.7	14.1
040	39.24	137.9	29.3	94.2	5.9	11.2	33.5	117.7	7.4	13.1	39.1
045	47.02	165.3	35.1	112.8	7.1	13.3	39.7	141.1	8.9	16.6	49.6
050	51.5	180.8	37.8	123.3	7.8	11.6	34.7	152.2	9.7	12.9	38.6
055	58.3	205.0	43.6	140.0	8.8	14.6	43.6	175.0	11.0	16.4	49.0
060	60.9	214.2	45.1	146.0	9.2	14.0	41.8	182.6	11.5	13.6	40.7
065	65.6	230.0	48.6	157.1	9.9	16.0	47.8	196.3	12.4	15.5	46.3
071	72.2	253.6	54.0	172.9	10.9	14.8	44.2	216.2	13.6	18.5	55.3

30MP Unit Size	Tons	Full Load			IPLV
30MP Unit Size	Tons	EER	IkW/Ton	COP	IkW/Ton	COP
016	15.02	16.0	0.750	4.69	0.572	6.15
020	20.46	16.0	0.750	4.69	0.550	6.39
030	31.31	16.0	0.750	4.69	0.581	6.05
032	32.06	16.2	0.742	4.74	0.600	5.86
040	39.24	16.1	0.746	4.71	0.559	6.29
045	47.02	16.1	0.747	4.71	0.578	6.09
050	51.5	16.3	0.735	4.79	0.472	7.45
055	58.3	16.1	0.748	4.70	0.464	7.58
060	60.9	16.2	0.741	4.75	0.474	7.42
065	65.6	16.1	0.743	4.73	0.476	7.39
071	72.2	16.02	0.749	4.70	0.485	7.25

Dimensions (in inches)

Unit Type	Length	Width	Height
30MP (50-71 Capacity)	55.0	32.0	66.3
30MPE Distribution Panel	55.0	32.0	66.3

IPLV: Integrated Part Load Value
AHRI: Air-Conditioning, Heating and Refrigeration Institute
COP: Coefficient of Performance
EER: Energy Efficiency Ratio
IkW: Input Kilowatt

NOTES
1. Rated (60Hz unit) in accordance with AHRI Standard 550/590 at standard rating conditions.
2. Standard rating conditions are as follows:
Cooler Conditions: Leaving Water Temperature: 44°F (6.7°C) Flow: 2.4gpm per ton (0.043 L/s per kW)
Condenser Conditions: Entering Water Temperature: 85°F (29.4°C) Flow: 3.0gpm per ton (0.054 L/s per kW)
Fouling Factor (Cooler): 0.00010 hr x sq ft x °F per Btuh (0.000018m² x K per W)
Fouling Factor (Condenser): 0.00025 hr x sq ft x °F per Btuh (0.000044m² x K per W)
3. IPLV is a single number part load efficiency value calculated from using the efficiency values at 100%, 75%, 50%, and 25% of load when the chiller is operating in AHRI conditions.
4. All data in the above table was generated in Packaged Chiller Builder version 3.39z. Please refer to the most current version of the Packaged Chiller Builder for the most up-to-date data.
5. Contact Carrier for custom ratings.

Lebih maklumat tentang United Faith Sdn Bhd