Akasel Cutting Consumables (Abrasive Cut-off Wheels) (Aka-Cut Series): Pilihan Utama di Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Penang, Singapore MSP Metrology (M) Sdn Bhd

Penerangan

Akasel Abrasive Cut-off Wheels optimised to provide high surface quality, long lifetime and maximum reproducibility by MSP Metrology (M) Sdn Bhd from Akasel Denmark.

Features

Abrasive Cut-off Wheels

Metallographic cutting is the first and very important step in sample preparation. To take out a representative sample from a large workpiece or to make longitudinal or cross sections of smaller parts, it must be ensured that the sample is removed without the creation of heat that could modify or even damage the structure.

The surface of the sample after cutting must be free from thermal damage and with a minimum of mechanical deformation. Otherwise the following preparation steps will take very long time, and there is a risk that possible changes to the microstructure are not removed and may be seen as the “real” structure.

Our wheels are, in respect of the above, optimised especially for
metallographic cutting to provide perfect results in the shortest possible time.

The abrasive cut-off wheels for laboratory and production type cut-off machines are available in 5 different standard sizes, from 250 to 432 mm dia., with an arbor size of 32 mm dia.

Our new range of cut-off wheels are named with both the material group they are designed for and the approximate hardness range. As can be seen in the table below, there are two Fe wheels for Ferrous Metals with a hardness of approximately 60 and 50 HRC.

The third wheel is especially developed for Titanium and Titanium Alloys, and the fourth wheel is designed for soft Non-Ferrous Metals.

Aka-Cut 500 HV is a fibre-reinforced wheel, very well suited for cutting of surface hardenend workpieces. The fibre-reinforcement strengthens the wheel and reduces breaking when subjected to pinching.

Use the table below to select the correct wheel for your specific material type, hardness and size

Full Specifications

Precision cut-off wheels 150 mm dia.
Product no.	Product name	Contents	GRWT kg
11152110	Aka-Cut NF10 Cut-off wheel 150 x 0.5 x 12.7 mm	5 pcs.	0.33
11152140	Aka-Cut Fe40 Cut-off wheel 150 x 0.5 x 12.7 mm	5 pcs.	0.33
11152160	Aka-Cut Fe60 Cut-off wheel 150 x 0.5 x 12.7 mm	5 pcs.	0.33

Cut-off wheels 250 mm dia.
Product no.	Product name	Contents	GRWT kg
11251140	Aka-Cut 500 HV Cut-off wheel 254 x 1.7 x 32 mm (150 – 500 HV)	10 pcs.	2.02
11252110	Aka-Cut NF10 Cut-off wheel 250 x 1.5 x 32 mm	10 pcs.	2.02
11252120	Aka-Cut Ti20 Cut-off wheel 250 x 1.5 x 32 mm	10 pcs.	2.02
11252150	Aka-Cut Fe50 Cut-off wheel 250 x 1.5 x 32 mm	10 pcs.	2.02
11252160	Aka-Cut Fe60 Cut-off wheel 250 x 1.5 x 32 mm	10 pcs.	2.02

Cut-off wheels 300 mm dia.
Product no.	Product name	Contents	GRWT kg
11301140	Aka-Cut 500 HV Cut-off wheel 305 x 2.2 x 32 mm (150 – 500 HV)	10 pcs.	3.24
11302110	Aka-Cut NF10 Cut-off wheel 300 x 2.0 x 32 mm	10 pcs.	3.24
11302120	Aka-Cut Ti20 Cut-off wheel 300 x 2.0 x 32 mm	10 pcs.	3.24
11302150	Aka-Cut Fe50 Cut-off wheel 300 x 2.0 x 32 mm	10 pcs.	3.24
11302160	Aka-Cut Fe60 Cut-off wheel 300 x 2.0 x 32 mm	10 pcs.	3.24

Cut-off wheels 350 mm dia.
Product no.	Product name	Contents	GRWT kg
11351140	Aka-Cut 500 HV Cut-off wheel 356 x 2.6 x 32 mm (150 – 500 HV)	10 pcs.	5.91
11352110	Aka-Cut NF10 Cut-off wheel 350 x 2.5 x 32 mm	10 pcs.	5.91
11352120	Aka-Cut Ti20 Cut-off wheel 350 x 2.5 x 32 mm	10 pcs.	5.91
11352150	Aka-Cut Fe50 Cut-off wheel 350 x 2.5 x 32 mm	10 pcs.	5.91
11352160	Aka-Cut Fe60 Cut-off wheel 350 x 2.5 x 32 mm	10 pcs.	5.91

Cut-off wheels 400 mm dia.
Product no.	Product name	Contents	GRWT kg
11411140	Aka-Cut 500 HV Cut-off wheel 406 x 3.2 x 32 mm (150 – 500 HV)	10 pcs.	8.91
11402110	Aka-Cut NF10 Cut-off wheel 400 x 3.0 x 32 mm	10 pcs.	8.26
11402120	Aka-Cut Ti20 Cut-off wheel 400 x 3.0 x 32 mm	10 pcs.	8.26
11402150	Aka-Cut Fe50 Cut-off wheel 400 x 3.0 x 32 mm	10 pcs.	8.26
11402160	Aka-Cut Fe60 Cut-off wheel 400 x 3.0 x 32 mm	10 pcs.	8.26

Cut-off wheels 432 mm dia.
Product no.	Product name	Contents	GRWT kg
11432110	Aka-Cut NF10 Cut-off wheel 432 x 3.0 x 32 mm	5 pcs.	4.90
11432120	Aka-Cut Ti20 Cut-off wheel 432 x 3.0 x 32 mm	5 pcs.	4.90
11432150	Aka-Cut Fe50 Cut-off wheel 4432 x 3.0 x 32 mm	5 pcs.	4.90
11432160	Aka-Cut Fe60 Cut-off wheel 432 x 3.0 x 32 mm	5 pcs.	4.90

Lebih maklumat tentang MSP Metrology (M) Sdn Bhd