| Call diameter | 1/2 ″ (15A) | |
| Material connection | Suction port | Rc1 / 2 |
| Discharge port | ||
| Air connection | Supply port | Rc1 / 4 (with air cock) |
| exhaust port | Rc3 / 8 (built-in muffler) * | |
| Regular air pressure | 0.2-0.7MPa | |
| Maximum discharge pressure | 0.7MPa | |
| Discharge rate / cycle | 70mL | |
| Slurry limit (maximum passing particle size) | 1 mm or less | |
| Quality |
-15BA □ NDP: 4.1Kg NDP-15BS □: 6.3Kg NDP-15FP □: 3.5Kg NDP-15FVT: 4.3Kg |
|
* The silencer is built into the pump body.
Rc3 / 8 screw holes are machined for connecting hoses that guide exhaust to ducts.
 |
Since the NDP-15 series uses the DP-10 series diaphragm, select the NDP-20 series, which is one size larger, for high-volume operation of 20 L / min or more. Nylon (PA) is used as the material of the valve receiver in the NDP-15BA □ series. Pay attention to the corrosion resistance. Not suitable for MEK etc. |
| Body (wet contact part) material | Diaphragm material | ||||
|
C: Chromium rubber (CR) |
N: |
T: Fluororesin (PTFE) |
H: |
S: Polyolefin-based thermoplastic elastomer (TPO) |
|
| A: Aluminum alloy (ADC12) |
NDP-15BAC (851946) |
NDP-15BAN (851947) |
NDP-15BAT (851945) |
NDP-15BAH (851948) |
NDP-15BAS (852680) |
| S: Stainless steel (SCS14) |
NDP-15BSC (851958) |
NDP-15BSN (851959) |
NDP-15BST (851957) |
NDP-15BSH (851960) |
NDP-15BSS (852681) |
|
P: Polypropylene (PPG) |
NDP-15FPC (851903) |
NDP-15FPN (851943) |
NDP-15FPT (851698) |
NDP-15FPH (851905) |
NDP-15FPS (852683) |
|
V: Polyvinylidene fluoride |
― | ― |
NDP-15FVT (852141) |
― | ― |
Note) Click the model / product number to display the parts list / exploded view.
|
Model |
NDP-15BA □ |
NDP-15BS □ |
NDP-15FP □ |
NDP-15FVT |
|
Ball valve |
NDP-15FP □ / NDP-15FVT ・ ・ ・ PTFE |
|||
|
Valve seat |
A5056 |
SUS316
|
PPG |
PVDF |
|
Valve receiver |
PA |
|||
|
Center disk |
A5056 |
PPG (SUS304 *) |
PVDF (SUS304 *) |
|
* SUS304 is the insert material
★ Valve model
NDP-15BA □ / NDP-BS □ ・ ・ ・ Ball valve
NDP-15FP □ / NDP-15FVT ・ ・ ・ Flat valve
★ Flat valve type cannot handle slurry liquid.
★ Initial self-priming head is full The model is 1m.
Malaysia
