⭐️FEATURES⭐️
- Up to 3000°c
- 100% anti-backfire
- Convenient to Gas Adjustment on handle
- Lightweight & Portable Precise Flame
➙ MAPP - 3600°F
- 3 x Faster Heat Transfer Than Propane
- Use only with torches designed for MAP-Pro or MAPP Gas.
➙ Replacement Cartridge
- MAPP GAS GTR-79 X 16OZ./453.6G 3600 °F
- AWELD OXYGEN CARTRIDGE X 1.4OZ/40.1G
⭐️BEFORE USE⭐️
1.Check cylinder and torch seals. Never use with damaged or missing seals. Discard cylinder if dirl or rust particles are in valve area.
2.Turn off torch.
3.Hold cylinder upright while attaching torch.
4.Attach cylinder outdoors away from pilot lights, flames, sparks, and other ignition sources. They can ignite leaking gas.
5.Hand tighten only. Never use tools to tighten. Over-tightening can damage seals.
6.Check for leaks. Put soapy water on connections. Look for Bubbles. Listen for hiss or escaping gas. Feel for extreme cold. Do not use if leaking.
7.Read and follow torch instruction.
⭐️DURING USE⭐️
1.Use upright to prevent flare-ups or flashes. Never drop or throw cylinder.
2.If torch sputters or flares up, turn cylinder upright and turn off torch, Vent area to remove unburned gas. Slowly turn on. After heating slight hiss, re-light.
3.Never use near pilot lights, flames, sparks, and other ignition sources. They can ignite leaking gas.
⭐️AFTER USE⭐️
1. Turn off torch. Let cool.
2. Detach torch when not in use
3. Detach outdoors away from pilot lights, flames, sparks. And other ignition sources. They can ignite leaking gas.
4. Replace cap to keep valve clean.
⭐️SELECTIONS⭐️
1. OX60P - MAPP & OXYGEN Brazing Torch Set
2. Brazing Torch only (without MAPP GAS & Oxygen)
