Penerangan
EP050R+MP
Until stock used up. We total left 2 unit now subject to the prior sales.
The new series to replace is EPxxxR2+BAC
The nominal flowrate for new series is slight diff with old series, you have to always to check chilled water flowrate with customer if using new series to replaced old series.
Old series EP050R+MP
New series EP050R2+BAC
Same as other size (15 to 50mm)
20mm EP020R+MP (old series)
20mm EP020R2+BAC (new series)
BELIMO EP..R+MP AHU PRESSURE INDEPENDENT-0-10V MODULATING (EPIV)(AC/DC 24V, 50/60HZ) (NON FAIL-SAFE)
Model
BELIMO EP050R+MP (4.8 L/S) (DN50 [2'']) AHU PRESSURE INDEPENDENT-0-10V MODULATING, 2-WAY PN25 (EPIV) (20NM, AC/DC 24V, 50/60HZ) (NON FAIL-SAFE)
Note
EP050R+MP is pressure independent valve and default flowrate is 4.8 L/s.
Pressure independent valve is to control and maintain the flow at certain flowrate upon setting regardless the system pressure change.
if no flowrate been provided, we will set it as default 4.8 L/s.
Characterised control valve with sensor-operated flow control, 2-way, Internal thread, PN 25 (EPIV)
• Nominal voltage AC/DC 24 V
• Control modulating, communicative
• For closed cold and warm water systems
• For modulating control of airhandling and heating systems on the water side
• Communication via Belimo MP-Bus or conventional control
• Conversion of active sensor signals and switching contacts
Lebih maklumat tentang Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd
