MIG 450A: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Puchong AIM Tools & Machineries Sdn Bhd

Penerangan

XP8

450A, 15.8kW, Mixed Gas (80/20) @ 100% Duty Cycle, .040''(1.0mm) – 3/32''(2.4mm) Wires.
Model:
XP450W-40E- Welding Torch Package c/w Euro Fitting x 4m

Consumables:

A - Nozzles	B - Contact Tips	C - Diffussers
XP3002-13 - Tapered Nozzle 1/2''/13mm XP3002-16 - Conical Nozzle 5/8''/16mm XP3002-16L - Conical Nozzle 5/8''/16mm Extended XP3002-19 - Cylindrical Nozzle 3/4''/19mm XP3002-19L - Cylindrical Nozzle 3/4''/19mm Extended	XP3003-12 - Contact Tip .045''/1.2mm M10 CuCrZr XP3003-12A - Contact Tip .045''/1.2mm M10 CuCrZr Al XP3003-16 - Contact Tip 1/16''/1.6mm M10 CuCrZr	XP3004B - Diffuser-Moulded c/w Ceramic Insert-M10 Head XP3004C - Diffuser-Ceramic-M10 Head

D – Head Assembly	E – Liners
XP3505 - Head Assembly-M10 Tips	XP3524-12-40 Steel Liner .040-.045''/1.0-1.2mm x 4m/13ft XP3524-16-40 Steel Liner .045-.063''/1.2-1.6mm x 4m/13ftt XP3524PC-16-40 Poly-Copper Liner .045-.063''/1.2-1.6mm x 4m/13ft

Table to show the affect on XP8 performance when using alternate gas types

	Mixed Gas (80/20)		Mixed Gas (95/5)		100% CO²		Max. Wire Size
Model	Amps	kW	Amps	kW	Amps	kW	Inch/mm
XP200A-40E	200	6.0	200	6.0	200	7.8	.045”/1.2mm
XP300A-40E	300	8.7	280	8.4	375	11.7	.045”/1.2mm
XP400A-40E	400	12.0	300	9.0	480	17.2	3/32”/2.4mm
XP450W-40E	450	15.8	450	15.8	450	15.8	3/32”/2.4mm

Superior Ergonomics
The neck and handle geometries have been designed to give a neutral wrist position when welding to reduce the risk of RSI (Repetitive Strain Injury).

The handle design is the most compact available and the handle grips are designed to prevent the torch slipping in the welders hand allowing him to relax his grip, further reducing strain.

The knuckle joint and tapered support improve freedom of movement and give progressive support to the power cable allowing it to form a smooth curve into the handle and maximise wire feed.

Lebih maklumat tentang AIM Tools & Machineries Sdn Bhd