Test of wire terminals according IEC, DIN, EN, BS, UL, SAE, MIL and NASA standards
Space-saving and non-slip bench top instrument with hardened scratch-resistant base plate
Always operable due to independant power supply, low cost of ownership
Clamping device securely grips different surface materials
Description
The manual pull-tester is a rugged, hand-lever bench-top tool designed to determine the tensile strength of all solderless (crimped) cable connections. The measuring range of 500 N or 1000 N cover cable cross sections from 0.06 to 6.0 mm² (AWG 30 to 8).
The ergonomic construction with a heavy base plate made of surface-treated, nitrided steel is designed for non-slip use.
The test specimen holder there is a changeable adapter with 12 different slit widths from 0.5 to 6.0mm, which covers all common cable thicknesses. Other adapters are available as accessories.
Using the USB interface, the test data in MsEcxel can be easily managed and in just a few minutes, a complete test report with statistical evaluation can be created as a PDF file.
Technical Specifications
Order No.
FMT-W30C5
FMT-W30K1
Capacity F(nom)*
N
500
1000
Resolution**
N
0.5
1
Tolerance**
% F(nom)
0.5
Temperature coefficient
%/ K
0.02
Reproducibility***
%F
0
Repeatability*
%F
0.3
Hysteresis***
%F
0
Max. operating force*
% F(nom)
120
Measurement error**
% F(nom)
1
Breaking force*
% F(nom)
150
Nominal deflection*
mm
0.15
0.25
Display
Type
LCD, 5 digits, 14mm high
Measuring principle
Force sensor with full-bridge strain gauge and high-speed μ-processor
Measuring rate
Hz (Peak)
~ 1.000
Memory
Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements
*) according to VDI / VDE / DKD 2638 at 0.2 ... 1 x F (nom)
**) according to DIN 1319-1
***) due to design and application, no independent error contribution
Scope of Supply
Pull tester (desktop unit) complete with test adapter and clamp-off device, USB interface, CD-ROM with software (without license), data cable and USB power supply. Operating instructions (DE, EN, FR, SP, IT) with CE certificate of conformity. Please order DAkkS Calibration certificate, software license, removable adapter and carrying case separately.
Muser Apac Sdn BhdTesting Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Malaysia
