Penerangan
The WANGEN progressing cavity pump Type A has swivel pushers inside the suction chamber that switch the pump from suction to pump mode. The pump is not sensitive to foreign objects and the deposition of foreign objects in the suction housing is not possible. In addition, hollow rotors ensure quiet operation.
SPECIFICATION
Max. flow rate (m³/h)
16025050075010001250
Max. differential pressure (bar)
161632486480
Benefits and Characteristics
- low Life Cycle Costs
- high operational reliability
- high priming capacity
- high pressure performance
- no foreign body deposits in the suction housing
- consistent modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
- almost pulsation-free conveyance
- easy fitting to slurry tankers or trolleys
- smooth running thanks to hollow rotors
- insensitive to foreign matter
- maintenance-friendly
- easy, space-saving assembly
- good pumping performance even against high pressure
- high suction lift (self-priming under certain conditions)
- long service life
- multi-way slide valve installed in the suction housing, can be operated by hand lever
- no tangling of fibers
Fields of Application
Attached to slurry tankers, the WANGEN progressing cavity pump of type A is suitable for distributing water, slurry, and thick fluids, such as manure. The drive is implemented via a power take off profile that enables the pump to be easily coupled to the tanker.
- distributing
- transfer pumping
- filling
- for use as feeding, unloading and recirculation pump
- suction
Suitable for the following media
- fertilizer
- liquid manure from chicken
- cattle slurry
- liquid manure
Technology/Details
- driven by PTO shaft
- stator with s-cone inlet for optimum filling of the pumping chamber
- slide valve in suction housing pivotable for suction and delivery
- conical slide valve housing with adjustable tap cock
- reinforced cardan joint
- hollow rotors for smooth running
- double, maintenance-free bearing
- shaft seal (mechanical face seal with oil quench)
- three suction flange in DN 133
Output |
60 - 90 m³/h or. 120 -160 m³/h |
Dry substance Content |
15 % |
Free ball passage |
up to 87 mm |
Lebih maklumat tentang HSA ASIA SDN BHD