AP-DC3203 Ionizing Air Nozzle: Pilihan Utama di Malaysia, Penang, Kuala Lumpur (KL), Selangor LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.

Penerangan

Product Description

AP-DC3203 Ionizing Air Nozzle

Details

Specification

Installation

General：
AP-DC3203 Ionizing Air Nozzle
AP-DC3203 DC ionizing air nozzle is one of Shanghai Anping (AP&T®)static eliminator product series.
AP-DC3203 adopts DC low-voltage power supply and boosts voltage by piezoceramics transformer. It generates high frequency high voltage ionized air which contain plentiful well balanced positive and negative ion at high voltage emitter and transmits to surface of object by pressed air to remove dust and static.
It is wildly used in electronics,plastic,chemical,printing,opto-electrical industries.

Features：
1. Human oriented design:Small and light, hand feel and drape, flexible operating and reliable.
2. High frequency high voltage AC corona discharge:Generates vast well balanced positive and negative ion,High efficiency of dust and static removing
3.High safety:High voltage circuit and high voltage generator totally enclose inside the gun body so that put an end to electric shock caused by leakage
4.Pneumoelectric switch:No gas no high voltage output. High frequency high voltage output only generates when gas pass through thus extends the product life.
5. Malfunction alarm:Green light on indicates working order. Red light on indicates error
6. Match standard:This product matches EMC standard.

Performance parameter

Model	AP-DC3203
Output voltage	DC24V
Working voltage	High frequency AC2200V
Current consumption	500mA
Power consumption	12W
Working distance	150-300mm
Dissipation speed	<1.0s(150mm from the front of the wind nozzle)
Ion balance	-15V~+15V(150mm from the front of the wind nozzle)
Operating temperature	0-40℃
Working humidity	30—70%RH(No water condensation)
Air pressure	0.05-0.5MPa
Ion emission	High frequency AC
Odor content	<0.03ppm
Adapter power supply	IN:AC100V—240V 50Hz/60Hz; OUT:DC24V 0.5A
Air source connector	6mm
Dimensions(LWH)	Nozzle:104.556.522mm Different types of nozzles, the size will be slightly different
	Power Adapter:74.229.562.2mm
	Power adapter power cord length:1.2m
Net weight	Nozzle:100g
	Power Adapter:71g
	Power adapter power cord length:41.5g
Gross weight	362.5 g

Warranty and After Sales Service：
(1)  AP-DC3203 ionizing air nozzle are strictly inspected before ex-work and match the entire related technical standard indicated in this manual.
(2)  AP&T® Promise: Repair or change any damaged parts caused by quality reasons free of charge within one year from the date of purchase after we confirm the quality issue.
(3) Above promise is not fit for the following situation:Alternation of the device, wrongly used, incorrect installation, abasement, negligence, and accidental damage, wrong input voltage, unpacking and repacking by user itself or maintain by other unauthorized service department.
(4)  AP&T® is free from any related responsibility of using the product except the parts specified here above.

Maintenance：
1 Take off the air cap in front of the air nozzle and observe the head of the alloy electrode. Change the electrode when it becomes obtuse while not sharp to guarantee the effectiveness of the static removing.
2 Operator should stop using the nozzle when red light on. Air gun can only be reused after checked by professional technician.
3 Air tube or socket should be changed promptly in case of leakage occurs to ensure the air pressure under normal condition.

Safety：
(1) Be aware to read this user manual carefully before install and use this device.
(2) Do not locate this device in the environment with high moisture.
(3) Do not use this device in the flammable and explosive surrounding.

Lebih maklumat tentang LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.