MEANWELL 150W CONSTANT POWER MODE LED DRIVER - XLG-150 SERIES - XLG-150-24

• XLG-150-24

• Wide input range 100~305VAC (Class I)
• Full power output at 70~100% constant power mode operation
• Metal case with IP667, suitable for outdoor application
• Surge protection with 6K V/4K V (10K V/6K V)
• 3 in 1 dimming function (Dim to off and Isolation design)
• India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440VAC for 48 hours
• Protection functions: OVP/SCP/OCP/OTP
• Life time >50,000 hrs. and 5 years warranty

• Skyscraper lighting
• Street lighting
• Floodlight lighting
• Stage lighting
• Fishing lighting
• Horticulture lighting
• Bay lighting
• DMX power supple
• Type HL for use in class I, Division 2

• XLG-150 series is a 150W LED AC/DC driver featuring the constant power mode. XLG-150 operates from 100~305VAC and offers models with different rated current ranging between 700mA and 12500mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-150 series comply with the latest version of IEC61347/GB7000. 1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both luminaire system during installation.

• Model : XLG-150-24

• DC voltage : 24V
• Constant current region : 16.8 ~ 24V
• Rated current : 6.25A
• Rated power : 150W
• Ripple & noise (max) : 240mVp-p
• Current adj. range : Adjustable for A-Type only (via the built-in potentiometer) / 3.2 ~ 6.25A
• Voltage tolerance : ±2.0%
• Line regulation : ±0.5%
• Load regulation : ±1%
• Setup, Rise time : 500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
• Hold up time : 10ms/ 230VAC 10ms/ 115VAC

• Voltage range : 100 ~ 305VAC 142 ~ 431VDC
• Frequency range : 47 ~ 63Hz
• Power factor : PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
• Total harmonic distortion : THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
• EFFICIENCY (Typ.) : 93%
• AC current : 12V : 1.8A / 115VAC 1.0A / 230VAC 0.8A/277VAC
• Inrush current : COLD START 50A(twidth=500μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
• Max. No. of PSUs on 16A circuit breaker : 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
• Leakage current : <0.75mA / 277VAC

• Over current : 95 ~ 108% / Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
• Short circuit : Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
• Over voltage : 27 ~ 34V / Shut down output voltage, re-power on to recover
• Over temperature : Hiccup mode, recovers automatically after fault condition is removed

• Working temp. : Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
• Max. case temp. : Tcase=+90℃
• Working humidity : 20 ~ 95% RH non-condensing
• Storage temp. humidity : -40 ~ +85℃, 10 ~ 95% RH
• Temp. coefficient : ±0.06%/℃ (0 ~ 60℃)
• Vibration : 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

• Safety standards :  UL8750(type”HL”), UL879,CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1,GB19510.14; EAC TP TC 004; IP67 approved
• Withstand voltage : I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
• Isolation resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

• MTBF : 712.17K hrs min. Telcordia SR-332 (Bellcore) ; 213.3Khrs min. MIL-HDBK-217F (25℃)
• Dimension : 180*63*35.5mm (L*W*H)
• Packing : 0.8Kg;16pcs / 13.4Kg /0.67CUFT