• Large Setting Range
• High Switching Performance
• Small Size
• Simple To Mount
SD-011(NC): Thermostat (Normally Closed); Contact Breaker For Regulating Heaters. The Contact Opens When Temperature Is Rising.
SD-011(NO): Thermostat (Normally Open): Contact Maker For Regulating
Filter Fans And Heat Exchangers Or For Switching Signal Device When Temperature Limit Has Been Exceeded. The Contact Closes When Temperature Is Rising.
| Temperature Range | 0 to +60°C |
| Switch Temperature Difference | 0~+60°C |
| Sensor Element | 7K (+4K tolerance) |
| Contact Type | Thermostatic Bimetal |
| Contact Resistance | Snap-Action |
| Service Life | <10m Ohm (Incidental Connection Line) |
| Max. Switching Capacky | >100,000 Cycles |
| Connection | 250VAC,10(2)A,120VAC,15(2)A,30WDC at 24VDC to 72VDC |
| Casing | 2-Pole Terminal, Clamping Torque 0.5Nm Max.:Rigid Wire 2.5mm2, Stranded Wire (With Wire End Ferrule) 1.5mm2 Plastic According To UL94 V-0, Light Grey |
| Mounting | Clip For 35mm DIN Rial |
| Dimensions | 64x33x44mm |
| Weight | 41.5g |
| Fitting Position | Variable |
| Operating/Storage Temperature | -20~+80°C |
| Protection Type | IP20 |
| Setting Range | Art. No. Contact Breaker (NC) | Art. No. Contact Maker (NO) | Approvals |
| 0 to +60°C | SD-011 | SD-011 | CE |
Malaysia
