| Top | : | The front and back edges are triple bent to enhance strength and rigidity. |
| Material – thickness 0.9mm C.R.S.S | ||
| Side | : | The side L/R have have 2 side brace welded to hold the upright |
| Material – thickness 0.9mm C.R.S.S | ||
| Upright | : | Two channel are welded together and welded to a 2” x 3” RHS which acts as leg base. Slots of 25mm intervals are punched on the upright for easy adjustability. |
| Material – thickness 1.5mm C.R.S.S | ||
| Bottom Brace | : | 1” X 2” RHS Bar with both ends welded with 3mmt plate with holes which will be riveted to the upright. |
| Shelf & Shelf end | : | Shelf is bent on all four sides and is riveted to the shelf end.Shelf can withstand a load of 70kgs
Shelf Depth – 228mm Material – thickness 1.2mm C.R.S.S |
| Book Support | : | The book support is made from diameter 5mm wire which can slide underneath the shelf and can stop at any point to support the books. |
| Wire & Turn Buckle | : | Diameter 3mm high tension wire and 6” turn buckle is used to strengthen the rigidity of the library shelving diagonally. |
| Color | : | Ral Gray or Beige powder coated. |
Malaysia
