Lithium-ion cells for the propulsion of electric road vehicles
Part 2 : Realiability and abuse testing
a) High Temperature endurance
This test is performed to characterize cell responses to high-temperature environment.
a.a) Test
The test shall be performed as follows
Adjust the SOC of cells to 100% for BEV application, and to 80% for HEV application in accordance with 5.3.
The cell, stabilized at room temperature, shall be placed in a gravity or circulating air-convection oven. The oven temperature of 130'c + 2k . The cell shall remain at this temperature for 30 min before the test is discontinued.
Note: If necessary, to prevent deformation, the cell may be maintained during the test in a manner that does not violate the test purpose.
b) Temperature Cycling
b.a) Test without electrical operation
The test shall be performed as follows.
Adjust the SOC of cell to 100% for BEV application, and to 80% for HEV application in accordance with 5.3.
Perform the temperature cycling in accordance with ISO 1670-4 as shown in table 4. The minimum operating temperature shall be -40'C or Tmin specified by manufacturer and the minimum operating temperature shall be 85'c or T max specified by the manufacturer. Perform 30 test cycles as specified by the manufacturer. Perfom 30 test cycles as specified.
Redmark Industry Sdn BhdTesting Instruments Kuala Lumpur (KL), Industrial Supplies Selangor, Measuring Equipment Supplier Malaysia, Penang ~ Redmark Industry Sdn Bhd
Malaysia
