Penerangan
Electric Vehicle EVSE Tester PCE-EVSE 310
Explore our Electric Vehicle Service Equipment (EVSE) Tester, designed for VDE 0100 testers to assess charging stations, particularly in charging mode 3 for electric cars. This adaptable tester is compatible with the PCE-ITE 55B installation tester and most standard VDE 0100 testers.
With built-in LEDs for voltage detection on three phases, quickly identify installation errors. The PP State rotary switch allows simulation of the charging cable's current carrying capacity using various resistors connected between PP and PE conductors.
Efficiently simulate different vehicle states with the CP State rotary switch, employing resistors between CP and PE conductors. The tester accommodates an external load socket for measurement purposes, facilitating the verification of electricity meter functionality.
For added versatility, the EVSE tester can simulate a PE fault (earth fault) and is packaged in a convenient transport bag. Additionally, an optional adapter is available for wallboxes with a type 1 connection.
Ensure accurate testing and diagnostics for electric vehicle charging stations with our comprehensive EVSE Tester.
Highlight
- PE pre-test
- Status of the Proximity Pilot PP and the Control Pilot CP
- Simulation of CP fault ''E'' and PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
- Optional adapter to type 1
Specification
|
Test Functions |
|
PE pre-test |
yes, with capacitive electrode |
|
PP Simulation |
open, 13 A, 20 A, 32 A, 63 A |
|
CP Status |
A, B, C, D |
|
|
E |
|
PE fault / earth fault |
Yes |
|
General technical data |
|
|
|
|
Connections Additional information |
|
|
Max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz
10A / 250 V
Type 2 plug fixed to the cable
(optional adapter required for type 1) |
|
Standard(s) |
IEC62196-2 Type 2 connector |
|
Cable length |
25 cm |
|
Safety standard |
CAT II / 300V |
|
Power socket |
max. 250 V; 50/60 Hz; 10 A |
|
Outputs |
2 x 4mm sockets (signal output terminals) |
|
Fuse(s) |
Power socket T10A/250V |
|
Protection class (device) |
IP40 |
|
Weight |
643 g |
|
Dimensions (L x W x H) |
600 x 105 x 73 mm |
|
Operating conditions |
0 ... 40 °C , 80 % r.H. |
|
Storage conditions |
-10 ... 50 °C , 80 % r.F |
|
Languages of instructions |
German, English |
Delivery Scope
1 x Electric Vehicle EVSE Tester PCE-EVSE 310
1 x operating instructions
1 x transport bag
Lebih maklumat tentang Redmark Industry Sdn Bhd
Malaysia
