Sonel PAT-85 Portable Appliance Tester: Pilihan Utama di Johor, Malaysia, Muar Marktest Technology Sdn Bhd

Comprehensive measurements of electrical equipment are possible with e.g. the Sonel PAT-85 electric equipment safety meter

The Sonel PAT-85 compact meter is a proven tool for measuring the parameters of electrical equipment which have an impact on safe use: resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power as well as RCD and PRCD circuit breakers. The meter performs flawlessly in areas where safety is of paramount importance. It is particularly useful in situations where there is a need for a quick check of power tools, three-phase equipment or white goods.

The device is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.

Thanks to the extensive measuring part, the device enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.

The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:

These data can be read and added to the meter memory using the optional QR code scanner.

The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.

The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.

The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick. Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:

The tester can be used to test the equipment performance in accordance with standards:

Measurement functions	Range	Resolution	Accuracy
Resistance of protective conductor (PE) I = 200 mA / 10 A / 25 A	up to 19.99 Ω	from 1 mΩ	from ±(3% m.v. + 4 digits)
Insulation resistance U_ISO = 100 V / 250 V / 500 V / 1000 V	up to 599.9 MΩ	from 1 kΩ	±(5% m.v. + 8 digits)
Current (clamp measurement)	up to 24.9 A	from 1 mA	±(5% m.v. + 5 digits)
Visual test		'
Continuity check of protective conductor (PE)		'
Insulation resistance measurement at three points		'
IEC cable test		'
Functional test
Apparent power S	up to 3.99 kVA	from 1 VA	±(5% m.v. + 3 digits)
Active power P	up to 3.99 kW	from 1 W	±(5% m.v. + 3 digits)
Reactive power Q	up to 3.99 kvar	from 1 var	±(5% m.v. + 3 digits)
Power Factor (PF)	up to 1.00	0.01	±(10% m.v. + 5 digits)
Current consumption for power measurement	up to 15.99 A	0.01 A	±(2% m.v. + 3 digits)
THD for voltage and current	up to 99.9%	0.1%	±(5% m.v. + 5 digits)
cosφ	up to 1.0	0.1	±(5% m.v. + 5 digits)
Leakage current measurement
PE leakage current and differential leakage current	up to 19.9 mA	0.01 mA	±(5% m.v. + 2 digits)
Substitute leakage current	up to 19.9 mA	0.01 mA	±(5% m.v. + 2 digits)
Touch leakage current	up to 4.999 mA	0.001 mA	±(5% m.v. + 3 digits)
RCD and PRCD switch test
Measurement of RCD parameters according to IEC 61557	up to 300 ms	1 ms	±(2% m.v. + 2 digits)
Measurement of RCD tripping current I_A for sinusoidal residual current (AC type)	up to 30 mA	0.1 mA	±5% I_Δn
Measurement of power network parameters
Voltage	up to 265.0 V	0.1 V	±(2% m.v. + 2 digits)
Frequency	up to 55.0 Hz	0.1 Hz	±(2% m.v. + 2 digits)

m.v. – measured value

Parameter	Value
Net weight (kg)	5
Package weight (kg)	7.3
Package width (cm)	40.5
Package height (cm)	25
Package length (cm)	30.5