UL Certified FYRA Vacuum Gauge Controller now with support of convection-enhanced pirani sensors.
The DigiVac FYRA vacuum gauge controller is a digital vacuum control instrument that is highly configurable and capable of driving multiple types of sensors (piezo, thermal, active, passive, and capacitance manometers). It employs a 3.9” capacitive touch screen and includes a tactile knob to easily interact with the vacuum gauge functions. FYRA can intuitively display and manage multiple sensors and control points.
Vacuum Science Simplified
We know vacuum applications can get complicated. FYRA was created to deliver scientific measurement and vacuum control simply with easy integration into almost any system in the market.
The Power of 4
FYRA gives you the essence of versatility with a touchscreen or dial interface and ability to measure and control from atmosphere to high vacuum range. Based on sensor choice, Ability to support measurement and control range of 10-10 Torr – 1000 Torr.
FYRA Display
Three Variations on how to integrate Fyra into your lab space: Bench Top, Panel Mount and Rack Mount are available.
Example of a FYRA Application
Imagine a vacuum system that is controlled by a PLC, where the PLC sends an analog signal corresponding to a vacuum pressure level to be maintained. Meanwhile, the FYRA sends back current vacuum pressure to the PLC.
In this application example, the other pieces of equipment would operate as follows (slots refer to back panel image):
Dinamo Valve
The pressure can be maintained by the DigiVac Dinamo Valve. (Slot B)
Capacitance Manometer
1000 Torr capacitance manometer would be the sensor to
be used for the control of vacuum pressure. (Slot D)
531 Sensor
The 531 sensor is used at the inlet of the vacuum pump to monitor inlet pressure. (Slot C)
Convectron
The convectron is put on the chamber in order to see the wide range base pressure of the system chamber. (Slot A)
VacStable
The VacStable is used to sweep a specific amount of gas (sccm) through the chamber. (Slot F)
WiFi Connection
View pressure in real time through vacuumnetwork.org, and log data through the USB interface.
About Panel/Rack Mount
The Panel mount kit for the Fyra vacuum controller allows easy panel mounting; 2U 19” rackmount kit for mounting 2 Fyra Scientific controllers in an industry standard 19 inch rack
| Sensors supported include: | |
| Inficon |
MPG400/401 PSG5xx ATM to Medium Vacuum Gauge Gemini MAG500 Cold Cathode Gemini MPG500 Cold Cathode Pirani PCG550 Porter SKY Stripe MAG |
| MKS |
AA01, 722B, 730B Convection: 27571 (1/8″ NPT), 275203 (KF16) |
| KJLC |
KJLC Pirani KJLC Cold Cathode KJLC Cold Cahtode Pirani AGC 0.1 T CM AGC 0.5 T CM AGC 1 T CM AGC 5 T CM AGC 10 T CM AGC 20 T CM AGC 50 T CM AGC 100 T CM AGC 1000 T CM |
| Agilent |
PVG-500 PVG-550 IKR251 FRG-700 FRG-720 PCG-750 PCG-700 536 531 CDG500 1 T CM CDG500 10 T CM CDG500 100 T CM CDG500 1000 T CM |
| Edwards | ASG2, APG200-XM, WRG200 |
| DigiVac |
SEN-VGT500 SEN-775i Quantum (SEN-DPP, SEN-DCP, SEN-DPCP) |
| Pfieffer |
PKR251 IKR251 |
| Leybold |
Ceravac: 1, 10, 100, 1000T CM Thermovac: TTR 91, TTR 96, TTR 97, TTR 101, TTR 200N |
| Sentra | 730 capacitance manometers |
| Units | Torr, mbar, kPa, Pa, microns (choose mTorr), millitorr (mTorr), mmHg, Hectopascal |
| Control Range | Ability to support 10-10 Torr – 1000 Torr |
| Dimensions | 6.5″x6.5″x2.5″ |
| Telemetry Options | USB, WiFi, 0-10 volts DC, Analog out, 0-10 volts DC Analog in |
| Sensor Support | MKS Convectron: 275071 (1/8″ NPT), 275203 (KF16); DigiVac: SEN-VGT500, SEN-775i, Quantum (SEN-DPP, SEN-DCP, SEN-DPCP); Pfeiffer: PKR251, IKR251; Agilent: FRG700, PCG-750, PCG700, 531, 536, 531 equivalent, or PVG 500; Setra: 730 capacitance manometers; Inficon: PSG500, PSG550, Porter, SKY, Stripe, MAG, MPG & MPG400 |
| Valve Support | Dinamo, VacStable (Bleed), Solenoid-type Bellows and Plunger, 24V valves that are less than 24 Watts |
Malaysia
