Four Channel Standard Analog Controller: Pilihan Utama di Johor Bahru (JB), Malaysia SEM Equipment Sdn. Bhd.

Penerangan

The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.

Model :

Features :

Exquisite appearance
Easy to install
Add guide rail buckle
Easy to operate
Operation panel front
Silent fan
More power
Good heat dissipation
Constant current stable output/no flicker

Dimension :

Parameters :

Model	Number of channels	Power/CH	Output voltage	external trigger
KM-ACS2.0-4C015W-24PS	4	15W	24V	Have
KM-ACS2.0-4C030W-24PS	4	30W	24V	Have

Technical Indicators :

Project	Parameter	Illustrate
Control method	Constant current	-
Input voltage	100-220VAC	-
Output voltage range	DC14V~24V	-
Number of channels	4 channels	-
Adjustable brightness level	Promise	Adjust by potentiometer
Single channel output maximum power	30W	-
External trigger method	Passive trigger, high and low level trigger switchable	Effective trigger voltage range: 5-24V DC
External trigger delay time	L, ON-OFF<60us	H, represents high level trigger;
	H, OFF ON <60us	L, represents low level trigger;
	L, ON-OFF<80us	ON and OFF represent LED
	L, OFF ON <80us	The on and off state of the light source
External trigger frequency	<1/T	Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz
Working environment	Temperature-10~50℃	-
Working environment	Humidity 20~80%RH non-condensing	-
Storage environment	Temperature-20~70℃	-
Storage environment	Humidity 10~55%RH non-condensing	-
Standby power consumption	<3W	-
Overall dimensions (mm)	135×85×158mm	L × W × H
Weight	0.9Kg	-

Lebih maklumat tentang SEM Equipment Sdn. Bhd.