Penerangan
YF-1000 DIGITAL MULTIMETER
INFORMATION The digital multimeter has been designed according to IEC-1010 concerning electronic measuring instruments with a measurement category (CATII 600V) and pollution degree 2.
Application
- DISPLAYS 3 1/2 digit LCD. Max. reading 1999.
- FUNCTION / RANGE SWITCH This switch is used to select the function and desired range as well as to turn ON/OFF the instrument. To extend the life of the battery, the switch should be set to the "OFF" position when the instrument is not in use.
- "COM" JACK Plug in connector for the black (Negative) test lead.
- "VO" JACK Plug in connector for the red (Positive) test lead for all voltage and resistance measurements.
- "MAB" JACK Plug in connector for the red (positive) test lead for current and BATT measurements
- "10A" JACK Plug in connector for the red (positive) test lead for current (between 200mA and 10A) measurements.
Features
- Maximum Display: 1999 counts (3 1/2 digits) with automatic polarity indication
- Polarity: Automatic negative polarity
- indication Indication Method: LCD display
- Sampling Speed: 2-3 time/sec
- Operating Temperature: 0 C - 50 C, <75% RH.
- Storage Temperature: -20 C - 60 C, <85% R.H.
- Power Supply: One 9-volt battery (NEDA 1604, 6F22)
- Low Battery Indication: "
Specifications
Electrical Specifications(23℃±5℃, below 80％RH )
|
Max measuring current
|
10A
|
|
Display counts
|
2000
|
|
Overvoltage category
|
------
|
|
DC Current
|
0.1µA~10A ±(1.2%+5)
|
|
AC Voltage
|
1V~750V ±(1.2%+10)
|
|
DC Voltage
|
1V~1000V ±(1.2%+5)
|
|
Resistance
|
0.1Ω~200MΩ
|
|
Continuity buzzer
|
YES(<50Ω)
|
|
Diode
|
About 2.8V
|
Lebih maklumat tentang MTM Precision Sdn Bhd
Malaysia
