Penerangan
Vent Silencer, Boiler Silencer
ISTIQ VENT SILENCER reduce the noise produced by the expansion of gas or steam from elevated pressures to atmospheric pressure. These absorptive silencers are used to suppress noise generated by high velocity gas streams such as steam vents, safety relief valve outlets, system blow downs and purge outlets. Each vent silencer is designed to attenuate the noise level to the required sound pressure level criteria at a given distance from the silencer.
Model IVS - Acoustic Diffuser & Expansion Attenuation - 30 dB
Applications
VENT SILENCER effectively silence high-velocity air, steam, and gas vents and blowdowns to atmosphere where
sonic or critical conditions exist in the valve or pipes. Typical applications include:
steam boiler relief valves
- superheater header relief valves
- boiler startup and purge
- high-pressure air vents
- natural gas blowdowns
- switch valves
- compressor blowoffs
- autoclaves
- steam ejectors
Construction
Typical VENT SILENCER are welded heavy-duty units. The inlet nozzle and diffuser are constructed of steel and are welded. The diffuser provides controlled pressure expansion to atmosphere and uniform flow distribution through the acoustic section of the silencer. The lined inlet plenum (expansion chamber) of the silencer is designed with a double shell separated by a layer of acoustic insulation and sound-deadening material. The inner shell is solid to prevent shell radiated noise and migration of the acoustic fill. The transmission loss across the plenum and bottom head is comparable to the silencer attenuation.
Selection Guidelines
Use the following design information from the valve data sheet for system analysis and silencer selection:
Type of gas- Molecular weight or specific gravity
- Ratio of specific heats
- Flow rate (lb/hr, ACFM or SCFM)
- Pressure and temperature upstream of valve and silencer
- Maximum allowable pressure drop (PSI) for valve and silencer
- Manufacturer’s name, and valve type and size
- Unsilenced noise levels from valve (if available)
- Silenced noise level (required at desired distance from source)
- Silencer inlet size and pressure rating
- Inlet orientation, axial or side
- Silencer orientation, vertical or horizontal
- Piping arrangement, including schematic if available
- Other required options
For more information:
CALL US NOW for inquiry at +603-7846 5188/+603-7846 5288 (Office) or 011-277 20340 (Whatsapp) or email at [email protected]
Lebih maklumat tentang ISTIQ Noise Control Sdn Bhd
Malaysia
