EE Series Electromechanical Level Measuring System
The EE300/EE400 Series is an electromechanical inventory level measuring system which uses state-of-the-art third generation weight & cable technology to periodically measure the level of liquid and bulk solid materials held in storage. The EE300/EE400 series level measuring system includes the EE300/EE400 sensor and available RCU remote control unit or MMS-TL PC-software.
The EE300/EE400 series electromechanical inventory level measuring system is a flexible inventory system that can consist of the EE300/EE400 sensor(s) only or can include the remote control unit (RCU) or MMS-TL materials management PC-software. The EE300 is a third generation weight & cable inventory level measuring sensor consisting of a sensing weight, heavy duty stainless steel cable, distance measuring component, position detection sensor and electronics (includes firmware). The EE300/EE400 electromechanical inventory level measuring system sensor detects the sensing weight status and measures the empty space distance within the vessel during a measuring cycle. Upon initiation of a measuring cycle the sensing weight and cable system is lowered into the vessel until the sensing weight contacts the material surface, which is detected by the position sensing system, then the sensing weight and cable system is raised and returned to the starting socketed position. When the measuring cycle is completed all EE300/EE400 electromechanical inventory level measuring system outputs and data are updated.
INDUSTRY
| No . | Category | EE300 | EE400 |
| 1 | Power supply | 88~264Vac 50/60Hz | 88~264Vac 50/60Hz |
| 2 | Auccuracy | 1. Transistor output: NPN / PNP(10mm/pulse) 2. Relay output: 3A/250Vac (100mm/pulse) |
±3cm |
| 3 | Analog output | 0/4-20mA ±1% | 0/4-20mA ±1% |
| 4 | Ambient temperature | 35°C~60°C | 40°C 85°C(With Heater) 30°C~85°C(Without Heater) |
| 5 | Operating temperature | 35°C~80°C | 40°C~105°C |
| 6 | Operating pressure | | max.+1.2bar |
| 7 | Measuring range | max.30m(option:30~45m) | max.30m |
| 8 | Measuring speed | Avg. 0.23m/s | Avg. 0.23m/s |
| 9 | Protection rating | IP66 | IP66 |
| 10 | Body material | Aluminum | Aluminum |
| 11 | Display | LCD (Dot matrix , 8 X 2) | LCM (Graphic,128x64 Dots) |
| 12 | Status LED |
LED Display:
1.Lock (Red) On (Fill-Up Protection) 2.RUN (Yellow) On 3.Buried (Red) Blink for 1 second
4.Break (Red) Blink for 2 seconds 5.Auto (Blue) On
6.High Alarm (Red) On 7.Low Alar (Red) On |
LCM Display: Lock Buried Break Status Display |
| 13 | Relay output | SPDT 3A/250Vac X 3 1. HI Alarm 2. LO Alarm 3. Buried: Blink for 1 second when alarm triggers Break: Blink for 2 seconds when alarm triggers Lock: LED on when alarm triggers |
SPDT 3A/250Vac X 3 (1. HI Alarm 2. LO Alarm or Buried,Break) |
| 14 | Operation instruction | | SPST 3A/250V X 1 |
| 15 | Anti-Dew heater | Start heating <16°C ( freeze prevention, prevent dew ) 110/220Vac max. PF 96.8W |
Start heating <16BC ( freeze prevention, prevent dew ) , 110/220Vac max. PF 96.8W |
| 16 | Cable break detection | Yes | Yes |
| 17 | Plumb buried detection | Yes | Yes |
| 18 | Activating from outside | Yes | Yes |
| 19 | Motor limited current protection |
Yes | Yes |
| 20 | Malfunction diagnosis display |
Yes | Yes(alternatire of HI Alarm,Lo Alarm or Buried alarm,Break alarm) |
| 21 | Material fill up protection |
Yes | Yes |
| 22 | Material discharge protection |
No | Yes |
| 23 | Intelligent start | Yes (Measuring interval is inverse proportional to medium level) | |
| 24 | Cable wire | ø1.2mm/-- | ø1.2mm/12mm*0.2mm |
Malaysia
