大型普通车床
CW61100E CW62100E CW61125E ...CW61160 CW62160
ain prameters type | CW61100E CW62100E | CW61125E CW62155E | CW64100E CW62140E | CW61125 CW62125 | CW61140 CW62140 | CW61160 CW62160 | CW61180/1CW62180/1 | ||
Swing overbet | mm(in) | 1000(40) | 1250(50) | 1400(56) | 1250(50) | 1400(56) | 1600(64) | 1800(72) | |
Swing overgap | mm(in) | 1250(50) | 1500(60) | 1650(66) | 1750(870) | 1930(77) | 2110(84) | ||
Swing over carriage | mm(in) | 650(26) | 900(36) | 980(38) | 900(36) | 1100(44) | 1280(51) | 1480(59) | |
Maximum turning length | mm(in) | 1500-16000(60-640) | 1500-16000(60-640) | ||||||
Maximum weight of workpiece batween centers | kg | 6000、8000 | 8000、10000 | ||||||
Width of the bed | mm(in) | 755(33) | 970(39) | ||||||
Spindle noses No. | ISO | A2-15 | A2-15 | ||||||
Diameter of spindle front bearing | mm(in) | 200(8) | 200(8)、220(8.8) | ||||||
Diameter of spindle hole | mm(in) | 130(5.2) 100(4) | 130(5.2)、100(4) | ||||||
Taper hole of spindle | Metric No.140 | Metric No.140 | |||||||
Number of spindle speeds | 手动21级(Manual operating) | ||||||||
Range of spindle speeds | r/min | 3.15-315 2.5-250(2-200) | 3.15-315 2.5-250(2-200) | ||||||
Main motor power | kw | AC22 | AC22 | ||||||
Rapid travelling speed of motor power | kw | 1.5 | 1.5 | ||||||
Section of tool shank | mm(in) | 45×45(1.8×1.8) | 45×45(1.8×1.8) | ||||||
Swivel angle of tool post | ±90° | ±90° | |||||||
Travel of transvers tool post | mm(in) | 200(8) | 200(8) | ||||||
Travel of longitudinal tool post | 200(8) | 400(16) | 200(8) | 400(16) | |||||
travel of cross slide | mm(in) | 520(21) | 695(27) | 720(28) | 880(35) | ||||
Rapid travelling speed of longitudinal tool post | mm/min | 935 | 935 | ||||||
Rapid travelling speed of transverse | mm/min | 1870 | 1870 | ||||||
Rapid travelling speed of longitudinal | mm/min | 3740 | 3740 | ||||||
Metric threads number and range | mm | 45、1-120 | 45、1-120 | ||||||
Inch threads number and range | T.P.I. | 42、30-1/4 | 42、30-1/4 | ||||||
Modul threads number and range | mm | 46、0.5-60 | 46、0.5-60 | ||||||
Diameter pitch threads number and range | D.P. | 48、60-0.5 | 48、60-0.5 | ||||||
Longitudinal number and range of feeds | m/rev | 97、0.064-12 | 97、0.064-12 | ||||||
Transverse number and range of feeds | m/rev | 97、0.032-6 | 97、0.032-6 | ||||||
Longitudinal tool post number and range of feeds | m/rev | 97、0.016-3 | 97、0.016-3 | ||||||
Diameter of tailstock quill | mm(in) | 160(6.4) | 160(6.4) 200(8) | ||||||
Taper hole of tailstock quill | Metric No.80、Morse No.6 | Metric No.80、Morse No.6 | |||||||
Travel of tailstock quill | mm(in) | 300(12) | 300(12) | ||||||
Weight of the lathe with 3m b.c. | kg | 10800 | 11500 | 12300 | 11200 | 12200 | 13200 | 14200 | |
Additional weight par 1m b.c. | kg | 1200 | 1400 | ||||||
Machine overall dimension(length×width×height)(3m) | mm | 6100×1900×2000 | 6100×2000×2100 | 6100×2100×2200 | 6360×2100×2300 | 6360×1960×2400 | 6360×2060×2500 | 6360×2160×2600 |