Testo 410-2 - Vane Anemometer [Delivery: 3-5 days subject to availability]

Testo 410-2 - Vane Anemometer [Delivery: 3-5 days subject to availability]

Category: Air Flow Available (Qty:2)
Purchasable on official site
RM 1034.00 For more information, visit our official website at muser.com.my

Description

testo 410-2 - Vane Anemometer
  Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.
 
 
Product Description
 
With its handy format, our testo 410-2 vane anemometer is extremely practical for fast check measurements at ventilation grilles and outdoors. With the permanently installed vane (diameter 40 mm), you can even measure low air velocities from 0.4 m/s to 20 m/s.
 
The anemometer is equipped with our Testo humidity sensor featuring long-term stability and with an NTC temperature sensor with a measuring range of -10 to +50 °C for inspecting the air conditions. You can therefore use this to measure air temperature and humidity reliably. The testo 410-2 displays other parameters at the touch of a button: the dew point and wet bulb temperature as well as the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
 
 
The anemometer offers practical accessories and useful functions
 
We have equipped the vane anemometer with a clip-on protective cap. This offers reliable protection if you are not using the testo 410-2 straight away. During the measurement you can use the fitted wrist strap, which prevents the vane anemometer from falling.
 
Take a look at the useful functions offered by the anemometer:

 
 
Delivery Scope
 
testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
 
 
Technical Data
 

Temperature - NTC
Measuring range -10 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Measuring rate 0.5 s
 
Humidity - Capacitive
Measuring range 0 to 100 %RH
Accuracy ±2.5 %RH (5 to 95 %RH)
Resolution 0.1 %RH
 
Velocity - Vane anemometer
Measuring range 0.4 to 20 m/s
Accuracy ±(0.2 m/s + 2 % of mv)
Resolution 0.1 m/s
 
General technical data
Dimensions 133 x 46 x 25 mm (incl. protective cap)
Operating temperature -10 to +50 °C
Protection class IP10
Warranty 2 years
Battery type 2 AAA micro batteries
Battery life 60 h (average, without display illumination)
Storage temperature -20 to +70 °C
Weight 110 g (with protective cap and batteries)
 
 
Downloads
 
Product Brochures

Product brochure testo 410  (PDF, 248.9 kB)
 
Manuals

Instruction manual testo 410-2  (PDF, 231.6 kB)
 

More detail about Muser Apac Sdn Bhd
Muser Apac Sdn Bhd
Muser Apac Sdn Bhd Testing Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Contact Us flagMalaysia