Atago RX-9000α | Automatic Digital Refractometer [Code 3263]

Atago RX-9000α | Automatic Digital Refractometer [Code 3263]

Category: RX-Alpha Series Refractometer Available
Purchasable on official site
For more information, visit our official website at muser.com.my

Description

Automatic Digital Refractometer RX-9000α
 
Calibration with water
   
Digital display
   
AC outlet (AC100 to 240V)
   
Automatic Temperature Compensation
   
High temperature samples
   
RS-232C Interface
   
User scales can be inputted
   
Can be connected to a printer
   
Measurement at a set temperature
   
Refractive index scale
  • The RX-9000α is a fully automatic digital refractometer with the highest level of accuracy of its kind.
  • Designed with a wide measurement range, measurement temperature range, and highest measurement accuracy, this instrument is suitable for multiple sample types ; such as measuring oils and fats with high melting points, aroma oils of high refractive index and organic solvents, meeting demands for high accuracy measurements.
  • The RX-9000α has a built-in Peltier thermo module for maintaining a constant sample temperature while taking measurements. Manual calibration is also possible to adjust to standard liquid values and to correct differences in measurement values between instruments.
  • This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
  • FDA 21 CFR Part 11 Software Included in Standard Delivery.
 
Specifications
 

Model RX-9000α 
Cat.No. 3263
Scale Refractive index
Brix
Measurement Range Refractive index (nD) : 1.32500 to 1.70000
Brix : 0.00 to 100.00%
(ATC : 5 to 70°C)
Resolution Refractive index (nD) : 0.00001
Brix : 0.01%
Temperature: 0.01°C
Measurement Accuracy *Repeatability Refractive index (nD) : ±0.00004 *±0.00002
(nD 1.33299 to1.42009 at Measurement Temperature 10.00 to 30.00°C)
Refractive index (nD) : ±0.00010 *±0.00005
(For ranges other than the above)
Brix±0.03% *±0.01%
(Brix 0.00 to 50.00% at Measurement Temperature 10.00 to 30.00°C)
Brix±0.05% (Brix 50.01 to 95.00% at Measurement Temperature 10.00 to 30.00°C)
Brix±0.10% *±0.02%
(For ranges other than the above, with Sucrose solution by MODE-1)
Temperature control range 5.00 to 70.00°C
(Lowest is ambient temp -10°C)
Measurement Temperature 5 to 70°C
Power Supply AC100V to 240V, 50/60Hz
Dimensions & Weight 37×26×14cm, 6.8kg
(Main Unit only)
Power consumption 65VA
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer (for ATAGO digital printers)
• Computer - RS-232C
Connection to a USB port requires a USB to RS-232 adapter (optional)
Warranty 2 years standard (3 years with product registration)
 
 
Options

* Calibration Certificate : Contact us for details.
 
 
Parts

 
Catalog Download (1.54MB)
 




 
"The World's Highest Standard of Technology Stemming from Over Half a Century of Expertise"


Features
 
World's Highest Standard of Accuracy
 
The RX series are the most accurate of ATAGO refractometers programmed with a trusted and advanced algorithm. The epitome of which boasts the accuracy of ±0.000010 nD and ±0.005% Brix.
 
Main Features

  1. Visual "Pass/Fail" Indication
  2. Programmable User Scale
  3. Password Security
 
FDA 21 CFR Part 11
 

Software is available to support your FDA 21 CFR Part 11 compliance.
 
Ergonomically Designed Layout
 
The RX- a series was designed with ease of use in mind. Extensive research was performed in the design phase to ensure an ergonomic interface that made operation easy while maximizing efficiency. 
 
4 Measurement Mode Options
 
MODE-1: For maximum accuracy
Displays the measurement value once the sample reaches the target temperature. 
 
MODE-3: For no temperature control
Provides an option to turn the thermo-module off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.
 
MODE-2: For fast results
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.
 
MODE-S: For emulsion samples
Displays the measurement value once a certain level of sample stability is achieved.
 
Please click the image below:
 
Tried, tested, and proven features and design
 
 
 
Application Examples
 
Refractive Index
 
Refractive Index is a common quality standard measure for pharmaceutical or chemical products. Measurements need to be taken at a constant temperature, commonly 20°C, 25°C, and 40°C. The RX-α units are equipped with the internal Peltier Thermo-Module, and measurement starts once the target temperature is reached.
 

Fragrance and Food Additives Pharmaceutical Products Cosmetics
     
Petroleum and Organic Solutions Oils and Fats Detergents
 
Brix
 
Brix is measured for quality control purposes in the food and beverage industries. The RX-α units are widely used for fruit juice, condiments, jams, and honey. The RX-007α (minimum indication 0.001% Brix) is used for tea and unsweetened drinks.
 

Beverages and Fruit Juice Jams, Honey, Liquid Sugar, Syrups Condiments, Sauces, Soups
 
Concentrations
 
The concentrations of industrial solutions are often monitored. Examples include water-based cutting oils and cleaning solutions, hydrogen peroxide, coolants, and alcohol solutions. Although the Brix scale is commonly used, user scales can also be programmed to display converted sample values.
 

Chemical Solutions Cutting Oil and Quenching Oil Antifreeze and Coolants
 
 
Digital Refractometers RX-α series Measurement Method
 
4 easy steps:
 

1. Place a sample on the prism. 2. Press the START key to start a measurement. 3. Measurement value is displayed. 4. Wipe off the sample to clean.
 

More detail about Muser Apac Sdn Bhd
Muser Apac Sdn Bhd
Muser Apac Sdn Bhd Testing Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Contact Us flagMalaysia