Comet H3060 temperature and humidity regulator with 230Vac/8A relays

Comet H3060 temperature and humidity regulator with 230Vac/8A relays

Category: Transmitters and Regulators Available
For more information, visit our official website at mobicon.com.sg

Description

code: H3060
Humidistat, thermostat with two relay outputs. Outdoor, indoor use.

 

Built-in humidity, temperature sensors. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

 

Included in delivery: 


Technical parameters Value
Output None
Measured Value Temperature + Relative Humidity
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to 80 °C
Relay Output Yes 230V
Two-State Input No
Lcd Display Yes
PoE No
Maximum switching voltage, current of relay output 250Vac, 8A
Audible alarm from built-in beeper - switchable
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output ±0.4°C
Available temperature units degrees Celsius, Fahrenheit
Accuracy and range of dew point temperature output - for more details see graphs ±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C
Accuracy and range of absolute humidity output ±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400 g/m3
Accuracy and range of specific humidity output ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and range of mixing ratio output ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and range of specific enthalpy output ±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Temperature operating range -30 to +80°C
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Temperature compensation of the humidity sensor all temperature range
Filtering ability of sensor cover 0.025mm - filter with stainless steel mesh
IP protection IP65 electronics, IP40 sensors
Power 110 to 240V / 50Hz to 60Hz
Current consumption 230 VAC - max. 70 mA, 115 VAC - max. 120 mA
Dimensions 136 x 214 x 45 mm (W x H x D), stem lenght 75mm
Weight approximately 390g

Optional accessories

Description
cable for transmitter adjustment via USB port
plastic sensor protection with stainless filter (gray)
PTFE sensor protection, white
sintered bronze sensor cover
PP4 Flat circular flange
PP90 Right-angled stainless steel flange
plastic gland for direct mounting of the humidity probe
Tool for easy connection to WAGO terminals 233 for serial output transmitters
Vessel for adjustment and calibration of humidity
Humidity Standard 10%RH, set 5pcs
Humidity Standard 80%RH, set 5pcs

More detail about Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd Electronics Components Distributor Singapore, Soldering Irons & Switches Supply, Measuring Instruments Supplier Singapore ~ Mobicon-Remote Electronic Pte Ltd
Contact Us flagSingapore