Technical parameters Ethernet
Value Ethernet
Measured Value Temperature + Relative Humidity
Construction Type With T+RH Probe on Cable
Design Industrial
Temperature Measuring Range-30 to 105 °C
Relay Output No
Two-State Input No
Lcd Display Yes
PoE Yes
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement +-2.5% relative humidity from 5 to 95% at 23 degree celsius
Accuracy of temperature output +-0.3 degree celsius
Resolution 0.1 degree celsius, 01%RH
Measuring Interval 2s
Available temperature units degree celsius, degree Fahrenheit Computed values dew point, absolute humidity. specific humidity, mixing ratio, specific enthalpy
Accuracy and range of dew point temperature output- for more details see graphs in manual +-1.5% at ambient temperature lower than 25 degree celsius and RH>30% range -60 to +80 degree celsius
Temperature compensation of the humidity sensor all temperature range
Temperature operating range -20 to +60 degree celsius
IP Protection IP30 electronics, IP40 sensors
LAN connection RJ-45 connector 10Base-T or 20 Base-TX
Communication protocols www, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols E-mail, SNMP Trap, Syslog
Configuration T-Sensor, www configuration
Filtering ability of sensor cover 0.025mm- filter with stainless steel mesh
Power power over Ethernet according to IEEE 802.3af or 5Vdc
Power connector co-axial, diameter 5.5 x 2.1mm
Length of the probe cable 1m, 2m or 4m optionally
Dimensions 136 x 159 x 45mm (W x H x D), probe length 88m, probe diameter 18mm
Weight approximately 380g
Singapore
