Measure the temperature of griddles, cooktops, hotplates, and other surfaces with higher accuracy than an infrared thermometer with our new Pro-Surface Thermapen. There are no emissivity adjustments to make or infrared distance measurements to calculate. Simply open the probe and measure.
Unlike separate probe and meter combinations, the Pro-Surface Thermapen is calibrated "as a system" for better accuracy. With the same swivel tip as our popular bell surface probe, you'll get solid contact with the measurement surface.
The Pro-Surface Thermapen reaches temperatures to 572°F and includes a NIST-Traceable calibration certificate. Each one is hand made and calibrated in England and made with a high performance type K thermocouple for top precision.
Designed for industrial use, the Thermapen body is splash-resistant. No buttons to press or learn. Swing open the probe and the Thermapen is on. No cables or plugs to wear out. The probe folds away for protection when not in use eliminating costly replacement probe purchases. For high temperature use order a protective silicone rubber boot for added thermal and drop protection.
Customize your Thermapen with micro configuration switches in the battery compartment. Switch from °F to °C, disable the auto-off, change resolution from 0.1 to 1, or perform a calibration trim.
For unmatched performance and convenience, order a Pro-Surface Thermapen for all of your locations and improve the performance of your heated equipment and surface measurements.
Specifications
Range
-58.0 to 572.0°F (-49.9 to 299.9°C)
Accuracy
±0.7°F (±0.4°C) from -58 to 392°F (-49.9 to 199.9°C)
±1.8°F (±1.0°C) from 392 to 572°F (200 to 299.9°C)
Resolution
0.1°F/°C full range (user reconfigurable to 1.0°F/°C)
Sensor
High performance type K thermocouple, with surface tip
Operating Range
-4 to 122°F (-20 to 50°C), (max ambient limits of Thermapen body)
Battery
CR2032 (3V) lithium coin cell x 2
Battery Life
1,500 hours
Auto-Off
10 minutes (user reconfigurable to disable auto-off)
Display
0.55" (14mm) LCD (user-reconfigurable to °C or °F)
Size
6.1" x 1.85" x 0.75" (153mm x 47mm x 19mm)
Weight
0.22lb (100g)
Calibration
Includes NIST-Traceable calibration certificate
Singapore
