Keysight DAQ970A Data Acquisition/System

Keysight DAQ970A Data Acquisition/System

Category: Data Acquisition Unit/Datalogger Available
For more information, visit our official website at mobicon.com.sg

Description

Introduction

The 34972A (OBSOLETE) data acquisition systems are legacy data acquisition/ switching system. Both designs are for ease of use with low cost per channel, modular flexibility, standard connectivity, and impressive measurement performance. The 34972A also offers the best combination of price and measurement performance. The next generation DAQ970A builds on the proven design of the 34972A.

Features
  • Built-in advanced 6 ½ digit DMM & signal conditioning; no external boxes required, with improved accuracy and speed
  • The ability to measure very low current ranges; 1 μA DC and 100 μA AC, and higher resistance range 1000 MΩ
  • Eleven measurement types that the 34972A can measure, as well as diode and capacitance; 1nF – 100μF ranges
  • Auto-calibration which compensates for drifts in the internal DMM; or on the DAQM907A multifunction module caused by time and temperature changes
  • Intuitive LCD screen and soft keys for easy configuration and measurement displays in multiple formats: number, bar meter, trend chart, and histogram
  • Scan rate of up to 450 channels/s with a new DAQM900A solid-state multiplexer module
  • Ten times more accurate and higher resolution DAC output and two additional voltage/current sensing channels with the DAQM907A multifunction module
  • Test automation without programming using the BenchVue’s DAQ software
 
Compatibility
The DAQ970A design is compatible with the 34972A with several exceptions. See Table 1 for product comparisons.
These are just some of the areas where the DAQ970A is equivalent with the 34972A:
  1. Functions and ranges The DAQ970A is a superset of 34972A capability. Differences are listed below.
  2. Measurement accuracy and resolution The DAQ970A’s specifications are as accurate or better with few exceptions. 
  3. SCPI compatibility The DAQ970A will work with SCPI programs written for the Keysight 34972A. Programming considerations and differences are listed below.
 
Sample more signals, faster, with new DAQ970A improvements:
  1. Up to 2X scan rate speed improvement; up to 450 ch/sec
  2. Up to 10X reading rates improvement to I/O interface & memory
  3. Up to 55% accuracy improvements for resistance
  4. Up to 75% accuracy improvements for AC voltage
  5. Up to 90% accuracy improvement for AC current

4. Mechanical size Height, width, and depth dimensions are the same as the 34972A.
5. Accessories Rackmount kit accessories are compatible with both products. However, there are new part numbers for the rack mount kits to be color compatible with the DAQ970A.
6. Manufacturing Both DAQs have the same rigorous quality standards and manufacturing process controls.
7. Service and support from Keysight Our worldwide team is available to help you calibrate your DAQ970A or answer any questions about either instrument.

Model DAQ970A 34972A
Slots 3 3
Built-in DMM
  • New: Auto calibration
  • 6 1/2-digit resolution
  • 6 1/2-digit resolution
Multiplexer scan rate Up to 450 channels per second Up to 250 channels per second
Types of measurements Measures and converts 13 different input signals:
  • New: Capacitance, and diode test
  • Temperature with thermocouples
  • RTDs and thermistors
  • DC/AC volts
  • 2- and 4-wire resistance
  • Frequency and period
  • DC/ AC current
Measures and converts 11 different input signals:
  • Temperature with thermocouples
  • RTDs and thermistors
  • DC/AC volts
  • 2- and 4-wire resistance
  • Frequency and period
  • DC/ AC current
Added ranges
  • 1000 MΩ range for resistance
  • 1 μA range for DC current
  • 100 μA, 1 mA ranges for AC current
  • Square wave input for frequency
No additional ranges
Display Color LCD / GUI Single line alpha-numeric display
Modules
  • New: 20 ch solid state switch mux
  • 20 ch armature switch mux
  • 16 ch reed switch mux
  • 20 ch actuator/switch
  • 4 X 8 matrix switch
  • Dual 4 ch RF Mux 50 Ω
  • Multi-function module
  • 40 ch armature switch mux
  • 20 ch armature switch mux
  • 16 ch reed switch mux
  • 20 ch actuator/switch
  • 4 X 8 matrix switch
  • Dual 4 ch RF Mux 50 Ω / 75 Ω
  • Multi-function module
  • 40 ch armature switch mux
PC based BenchVue DAQ Application Software BenchVue to configure and control tests, display results, and collect and export data for further analysis
Interface
  • Front and back USB; LAN/ LXI
  • External Trigger / Alarms
  • Front and back USB; LAN/ LXI
  • External Trigger/alarms

More detail about Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd Electronics Components Distributor Singapore, Soldering Irons & Switches Supply, Measuring Instruments Supplier Singapore ~ Mobicon-Remote Electronic Pte Ltd
Contact Us flagSingapore