Water and wastewater
Pressure measurement and point level detection in the pumping station
Pressure measurement and point level detection in the pumping station

 

Pressure measurement and point level detection in the pumping station

VG Instruments (SEA) Sdn Bhd flag
Category: Water and wastewater Available
For more information, visit our official website at vginstruments.com.my
Visit Official Site Contact Us
Description

Pumping station

Pressure measurement and point level detection in the pumping station

 

Process data

Measuring task
Pressure measurement and point level detection
Measuring point
Pipeline
Measuring range up to
+10 … +30 bar
Medium
Water
Process temperature
0 … +20 °C
Process pressure
0 … +30 bar
Special challenges
Pressure surges

Application

When the water treatment plant is at a higher elevation, the water needs to be pumped from the water source to the plant. From there it flows down to the supply network under gravity. The pressure of the pumping system must be constantly monitored. Point level switches are also used as dry run protection for the pumps.

Your benefit

Reliable
Approved materials according to FDA and EC 1935/2004, as well as local certification
Cost effective
Long service life of sensors
User friendly
Simple setup and commissioning
 

Recommended products

VEGABAR 82

Pressure transmitter for monitoring the pressure at the pump station

  • CERTEC® measuring cell meets the highest hygienic requirements
  • Long-term stability thanks to robust ceramic CERTEC® measuring cell
  • High measurement accuracy independent of pressure surges
Measuring range - Distance
-
Measuring range - Pressure
-1 ... 100 bar
Process temperature
-40 ... 150 °C
 

VEGASWING 61

Dry run protection and leakage detection via vibrating level switches

  • Reliable detection of dry run and leakage
  • Fast and reliable function test by simply pressing a button
  • Simple installation and setup
Measuring range - Distance
-
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 64 bar
 

VEGAMET 391

Signal conditioning instrument for voltage supply to sensors and pump control

  • Reliable power supply to connected sensors
  • Compact, on-site control unit for efficient control of pumps
  • Easy-to-read display and adjustment directly on site
Protection rating
IP 20/IP 65
Input
1 x 4 … 20 mA/HART sensor input
with transmitter power supply
Output
1 x 0/4 … 20 mA current output
up to 6 x operating relay
1 x fail safe relay
1 x Ethernet or 1 x RS232

More detail about VG Instruments (SEA) Sdn Bhd
VG Instruments (SEA) Sdn Bhd
VG Instruments (SEA) Sdn Bhd VEGA Instruments, Level Gauge Malaysia, Pressure Measurement, Transmitter Supplier ~ VG Instruments (SEA) Sdn Bhd
Contact Us flagMalaysia